Derivation of spring constant k: Where can I find it?

AI Thread Summary
The discussion centers on finding a reference for the mathematical derivation of the spring constant formula k = G*d^4/(8*n*D^3) for coiled springs. Despite a Google search yielding no results, participants note that this derivation is a fundamental concept in linear elasticity theory. A suggestion is made to consult A. C. Ugural's "Mechanical Design: An Integrated Approach" for relevant information. Additionally, the derivation of the spring constant is linked to the deflection of a coiled spring, which can be derived using Castigliano's theorem. The quest for a definitive source continues, highlighting the challenge in locating academic references on this topic.
redoubt
Messages
2
Reaction score
0

Folks---

I want a reference(text or journal article) that presents the mathematical
derivation of the following formula for the spring constant k of a coiled,
ideal spring.

k = G*d^4/(8*n*D^3)

A Google search was unsuccessful.
 
Physics news on Phys.org
Spring Constant Derivation: Where can I find it?

Folks---

I want a reference(textbook or journal article) that presents the mathematical derivation of the following formula for the spring constant k of a coiled, ideal spring.

k=G*d^4/(8*n*D^3)

A Google search was unsuccessful.

When this question was asked in the General Physics Forum several weeks ago, there were 81 views, but no replies. I believe this derivation is a classic in linear elasticity theory, but I can't locate it.
 
If this is not a homework type question, you might try Eng-Tips to see if anyone on there knows.
 
Where did you find the formula?

I found this:
http://www.sussex.ac.uk/engineering/documents/sm_lecture_19.pdf

but no obvious derivations...
 
Last edited by a moderator:
redoubt said:
Folks---

I want a reference(textbook or journal article) that presents the mathematical derivation of the following formula for the spring constant k of a coiled, ideal spring.

k=G*d^4/(8*n*D^3)

A Google search was unsuccessful.

When this question was asked in the General Physics Forum several weeks ago, there were 81 views, but no replies. I believe this derivation is a classic in linear elasticity theory, but I can't locate it.

This constant comes from the derivation of the deflection of a coiled spring. By deriving the deflection, one can extract the spring constant k from the equation.

The derivation of the equation for the deflection of a spring comes from Castigliano's theorem.

See A. C. Ugural "Mechanical Design: An Integrated Approach" McGraw-Hill Professional (2003): pg. 565
 

Thread 'Average velocity as a weighted mean'

Hello everyone, Consider the problem in which a car is told to travel at 30 km/h for L kilometers and then at 60 km/h for another L kilometers. Next, you are asked to determine the average speed. My question is: although we know that the average speed in this case is the harmonic mean of the two speeds, is it also possible to state that the average speed over this 2L-kilometer stretch can be obtained as a weighted average of the two speeds? Best regards, DaTario
View full post »

Thread '1:1 versus 2:1 Mechanical Advantage debate'

The rope is tied into the person (the load of 200 pounds) and the rope goes up from the person to a fixed pulley and back down to his hands. He hauls the rope to suspend himself in the air. What is the mechanical advantage of the system? The person will indeed only have to lift half of his body weight (roughly 100 pounds) because he now lessened the load by that same amount. This APPEARS to be a 2:1 because he can hold himself with half the force, but my question is: is that mechanical...
View full post »
Thread 'Beam on an inclined plane'

Thread 'Beam on an inclined plane'

Hello! I have a question regarding a beam on an inclined plane. I was considering a beam resting on two supports attached to an inclined plane. I was almost sure that the lower support must be more loaded. My imagination about this problem is shown in the picture below. Here is how I wrote the condition of equilibrium forces: $$ \begin{cases} F_{g\parallel}=F_{t1}+F_{t2}, \\ F_{g\perp}=F_{r1}+F_{r2} \end{cases}. $$ On the other hand...
View full post »

Similar threads

Need to find the spring constant to achieve Max Velocity
Replies
6
Views
2K
Approximating a spring constant for an air leg
Replies
1
Views
2K
Can a spring reach its theoretical velocity without launching a projectile?
Replies
14
Views
2K
Can I determine mass & spring k from graph of wave, t, a, & vectors?
Replies
1
Views
2K
I What is the Formula for Calculating the Length of a Hanging Spring?
Replies
27
Views
4K
Storing energy in a compression spring
Replies
26
Views
7K
Coil Compression Spring Reaction to a Pulse
Replies
15
Views
3K
Crossbow Physics: Calculating Spring Constant, Tension Force & Power
2
Replies
52
Views
12K
Finding the value of k (spring constant)
Replies
4
Views
3K
A Solving "const. K" in Gourgoulhon's SR in General Frames
Replies
4
Views
2K

Hot Threads

Recent Insights

Back
Top