Measuring Distances in Microns/Nanometers for Small Objects

AI Thread Summary
Measuring distances in microns or nanometers for small objects, such as bacteria or tiny device components, poses challenges, particularly when light interference methods are impractical. Relative distance measurements are easier to obtain than exact distances, and a series of relative measurements can potentially yield precise results. Electron microscopes can visualize objects smaller than the wavelength of light, but they are costly and complex. Optical comparators offer a more accessible alternative for measuring small mechanical parts, achieving precision down to 0.0001 inches without requiring specialized knowledge. Overall, various methods exist for measuring small distances, with optical comparators being a practical option for many applications.
sid_galt
Messages
502
Reaction score
1
How are distances on the order of microns or nanometers measured for objects like say a bacteria or a very small component of a device where distance measurement through interference of light isn't very feasible?
 
Engineering news on Phys.org
relative distance or exact distance..?
it is a lot easier to get relative distance than exact..
 
Well, exact distance.
Can't you get that by doing a series of relative measurements?

And anyhow, how do we measure relative distances?
 
Can electron microscopes help here? I know they can see stuff smaller than the wavelength of light.
 
They are very expensive even if you try and make one yourself. I am sure there are other more cost effective methods.

As for wavelength of light, that depends on what wavelength you are referring too.
 
Sid, not too sure what you want to measure, but mechanical parts are often measured using something called an optical comparator. Most precision machine shops have these things, and I'm sure if its use were applicable you could use one without having to pay for its use. It only takes a few seconds to measure something with it, and you don't need any experience or special knowledge to run one. They can measure lengths down to about 0.0001" or less. Here's a link to a description: http://www.starrett.com/pages/691_optical_comparators.cfm
 
Last edited by a moderator:
Thread 'Where is my curb stop?'
My water meter is submerged under water for about 95% of the year. Today I took a photograph of the inside of my water meter box because today is one of the rare days that my water meter is not submerged in water. Here is the photograph that I took of my water meter with the cover on: Here is a photograph I took of my water meter with the cover off: I edited the photograph to draw a red circle around a knob on my water meter. Is that knob that I drew a red circle around my meter...
Hi all, i have some questions about the tesla turbine: is a tesla turbine more efficient than a steam engine or a stirling engine ? about the discs of the tesla turbine warping because of the high speed rotations; does running the engine on a lower speed solve that or will the discs warp anyway after time ? what is the difference in efficiency between the tesla turbine running at high speed and running it at a lower speed ( as fast as possible but low enough to not warp de discs) and: i...
Back
Top