A wireless charger uses electromagnetic induction to transfer energy from the charging pad to the device. The charging pad contains a coil of wire that creates an alternating magnetic field when connected to a power source. This field induces a current in the coil inside the device, which then charges the battery.
Technically, yes. As long as the book is large enough to hold the necessary components and has a cover that can be removed, it can be turned into a wireless charger. However, it is important to note that this process requires some technical knowledge and may not be suitable for all books.
You will need a book with a removable cover, a wireless charging pad, a coil of wire, a power source, and some basic tools such as a soldering iron and wire cutters. You may also need additional materials depending on the specific design of your wireless charger.
As with any DIY project involving electricity, there is a potential risk of electrical shock or fire if not done properly. It is important to follow safety precautions and research the process thoroughly before attempting to DIY a wireless charger into a book. It is also recommended to have some experience with electronics and soldering before attempting this project.
Yes, you can still use the book as a book after turning it into a wireless charger. The components can be concealed within the cover and will not interfere with the book's functionality. However, it is important to note that the weight of the components may make the book heavier and bulkier to carry around.