Ebook about the dynamic analysis of a bar mechanism?

AI Thread Summary
The discussion centers on finding an ebook related to the dynamic analysis of a bar mechanism, which is likened to a crank and slotted lever mechanism with an additional link. Participants mention the possibility of simulating kinematic chains using Inventor software and offer to share existing simulations. Recommendations for theoretical resources include "Theory of Machines" by Shigley and Thomas Bevan, which provide comprehensive descriptions of kinematic chains. The request for ebooks of these texts indicates a desire for accessible educational materials. Overall, the conversation highlights the need for resources on dynamic analysis and kinematic mechanisms.
e_bogdan
Messages
3
Reaction score
0
Do you know an ebook about the dynamic analysis of a bar mechanism?Thank you.
 
Engineering news on Phys.org


what is bar mechanism??
 


A bar mechanism is something like that!Maybe I didn't name it right!
 

Attachments

  • mecanism.JPG
    mecanism.JPG
    26.1 KB · Views: 508


seems like a crank and slotted lever mechanism, but it has one extra link and I can't figure out which point is the slotted link pivoted!
You can do dynamic simulation of kinematic chains in Inventor. I think I have simulation for crank and slotted lever mechanism(tell me if you need it).
For theory, I had a book Theory of Machines, shigley(I don't remember the full name) and I have Theory of Machines,Thomas Bevan. It has a nice qualitative and quantitative description for kinematic chains
 


If u have these books as ebooks,could you send them to me?
 

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »

Similar threads

3D printers for mechanical engineering
Replies
1
Views
1K
Is Studying Planar Multibody Dynamics Essential for Mechanical Engineers?
Replies
2
Views
2K
Practical application of engineering mechanics dynamics in civil engineering
Replies
4
Views
3K
Engineering Static Vs Dynamic Force Analysis in Mechanism
Replies
3
Views
2K
Q: Fluid drainage along the outside of an inclined cylinder
Replies
5
Views
1K
Inverse Kinematics: Oscillators and Multi-Bar Links
Replies
2
Views
1K
Random Vibration Fatigue Analysis
Replies
4
Views
2K
Integrating FE and Dynamics
Replies
2
Views
1K
Practicing Mechanical Engineering Dynamics Problems
Replies
2
Views
2K
Linkage analysis of forces and stresses?
Replies
21
Views
4K

Hot Threads

Recent Insights

Back
Top