Free fall of a stone off a cliff

  • Thread starter Thread starter brendj3
  • Start date Start date
  • Tags Tags
    Fall Free fall
AI Thread Summary
A stone falls from rest off a cliff, while a second stone is thrown downward 2.4 seconds later with an initial velocity of 47.04 m/s. The problem requires calculating the time it takes for the first stone to hit the ground and the height of the cliff, using the acceleration of gravity at 9.8 m/s². The initial calculations provided were incorrect as they assumed the final velocity was zero at impact. To solve the problem, two equations must be established for the heights of both stones as functions of time, allowing for the determination of the cliff's height and the time to impact.
brendj3
Messages
2
Reaction score
0
I am having trouble with this one. for all the formulas I tried I need the velocity, which they don't tell us in the problem. Any help would be appreciated .

A stone falls from rest from the top of a cliff.
A second stone is thrown downward from the
same height 2.4 s later with an initial speed of
47.04 m/s. They hit the ground at the same
time.
The acceleration of gravity is 9.8 m/s2 .
How long does it take the first stone to hit
the ground? Answer in units of s.

How high is the cliff? Answer in units of m.
 
Physics news on Phys.org
Hi brendj3,

brendj3 said:
I am having trouble with this one. for all the formulas I tried I need the velocity, which they don't tell us in the problem. Any help would be appreciated .

A stone falls from rest from the top of a cliff.
A second stone is thrown downward from the
same height 2.4 s later with an initial speed of
47.04 m/s. They hit the ground at the same
time.
The acceleration of gravity is 9.8 m/s2 .
How long does it take the first stone to hit
the ground? Answer in units of s.

How high is the cliff? Answer in units of m.

What have you tried so far? They give some velocities in the problem, but until you show your work we can't know where you are getting stuck at.
 
ok what I did was

0 = -9.8 t + 47.04

where 47 is the initial velocity and 0 is the velocity i got a time of 4.8 sec. and then when added to the 2.4 it would give me 7.2 seconds, but I heard this answers was wrong. Do you know what the problem is?
 
brendj3 said:
ok what I did was

0 = -9.8 t + 47.04

where 47 is the initial velocity and 0 is the velocity i got a time of 4.8 sec. and then when added to the 2.4 it would give me 7.2 seconds, but I heard this answers was wrong. Do you know what the problem is?

You cannot assume that the velocity is zero as it hits the ground. At the instant the rock hits the ground, the rock will actually be traveling faster than its initial velocity since the acceleration due to gravity is in the same direction as the initial velocity. To solve this problem, you will actually need to solve two equations for t and h where h is the height of the cliff. Since you have two stones, both falling the same distance, h, but with different initial velocities it should be easy to get the two equations you need to solve...What is the height, y_1 of the first stone as a function of time? How about the height of the second, y_2?When are they equal?
 
brendj3 said:
ok what I did was

0 = -9.8 t + 47.04

where 47 is the initial velocity and 0 is the velocity i got a time of 4.8 sec. and then when added to the 2.4 it would give me 7.2 seconds, but I heard this answers was wrong. Do you know what the problem is?

What you calculated is the time it takes gravity to decelerate 47m/s to 0. This would be the time to max height if you threw the stone in the air at that speed. Interesting, but not necessarily useful.

Think about what you know. You know an initial velocity and a time delay and you are looking for the height of the cliff and time to the bottom.

What equation do you know that relates distance and initial velocity and time? That is the equation you should focus on.
 
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Back
Top