Freeing Electrons from Wires: A How-To Guide

  • Thread starter Thread starter karawan
  • Start date Start date
  • Tags Tags
    Electrons Wires
AI Thread Summary
Freeing all electrons from a wire is theoretically impossible without extreme measures, such as using an atomic bomb, as it would result in a significant release of energy. Attempting to remove electrons will only yield a small number, leading to detectable forces due to the remaining electrons. The Coulomb force equation illustrates the immense energy involved in separating charges, indicating that even a minimal separation can produce substantial force. The discussion raises questions about whether the focus is on all electrons or just the free-moving ones in the metal. Ultimately, the complexities of electron behavior and forces make complete separation unfeasible.
karawan
Messages
14
Reaction score
0
can i empty a wire from its free electron.
 
Physics news on Phys.org
Yes but only with an atomic bomb.
 
no, not possible statistically.
 
Did you consider the energy involved or the force?
The force between two point charges is Q1 Q2/ (4 π ε0 R2) (the Coulomb force)
For a few grams of metal, you're talking of 1023 electrons separated by, a mm or so. Put the numbers into the formula
The force will blow the top of your head off.

Under normal circumstances you only separate a very few of the total number of electrons from the atoms in a piece of wire and you still get a detectable force. When you want to take ALL of them, you get an enormous value for the force. I'll leave you to do the calculation.
 
Just to clarify for myself, is this talking about ALL the electrons in the metal, or only the free ones that freely move around the metal?
 

Thread 'Reflections at the source point of a transmission line'

I was using the Smith chart to determine the input impedance of a transmission line that has a reflection from the load. One can do this if one knows the characteristic impedance Zo, the degree of mismatch of the load ZL and the length of the transmission line in wavelengths. However, my question is: Consider the input impedance of a wave which appears back at the source after reflection from the load and has traveled for some fraction of a wavelength. The impedance of this wave as it...
View full post »

Similar threads

B How is surface charge accumulated?
Replies
36
Views
6K
I Angular momentum associated with a current carrying circular wire
Replies
9
Views
2K
Number of free conduction electrons in a segment of wire
Replies
2
Views
1K
I Can current flow in an open circuit?
Replies
4
Views
3K
I Is there traction force between moving electrons & copper wire?
Replies
6
Views
1K
Identical Wires with different voltage--does electron behavior differ?
Replies
19
Views
2K
I What causes skin effect in AC currents?
Replies
2
Views
1K
B Switch-to-lightbulb wire delay
Replies
5
Views
2K
I Qv x B force in electron's proper frame
Replies
6
Views
1K
Why Doesn't Electric Force Cause Wires to Move?
Replies
15
Views
2K

Hot Threads

Recent Insights

Back
Top