A Ground Penetrating Radar formula

AI Thread Summary
The discussion centers on the physics of ground penetrating radar (GPR) and the importance of the dielectric constant (K) in determining reflected energy. Participants seek a derivation of the formula related to energy reflection and an intuitive explanation of K's significance, particularly regarding the motion of free electrons. It is noted that the reflection coefficient is expressed in terms of fields rather than power, and that changes in permittivity and conductance when entering different media affect the electric field strength. The role of water's high permittivity due to its molecular structure is also highlighted. Understanding these principles is crucial for interpreting GPR data effectively.
PeterPeter
Messages
23
Reaction score
0
TL;DR Summary
Derivation of reflection coefficient?
I am interested in the physics of ground penetrating radar.
1) Does anyone know where I can find a derivation of the formula in the attached jpg for the energy reflected? K=the dialectic constant.
2) An intuitive explanation of why the dialectic constant is important in determining the energy reflected. Obviously it must have something to do with the motion of the free elections.
Thanks in advance
Jerry

Source of jpg:

Interpreting GPR Data: The Basics Part 1 by Greg Johnston
Ground Penetrating Radar formula for reflection.jpg
 
Physics news on Phys.org
In this formula, notice that the SQRT sign could be placed ahead of the whole expression. Then we can see that K1-K2 is the portion of incident power reflected and K1+K2 is the total incident power, so the formula is trivial and not very enlightening. Reflection Coefficient is specified in terms of the fields (or voltages) rather than the power, so we take a square root.
When a wave is traveling in free space, the electric and magnetic fields have a fixed ratio of 377. When the wave enters another medium, such as moist soil, the main things that happen are that the permittivity and conductance increase. Permittivity is associated with capacitance. This causes the electric field to be weaker than in free space, and the ratio of electric to magnetic fields is altered. This is equivalent to the case of a transmission line where there is a change in characteristic impedance. The wave entering the ground cannot suddenly adjust to the new impedance, and part of it is reflected back.
Water has a very high permittivity which is caused by the asymmetrical shape of the molecule, making it polar.
 
tech99 said:
In this formula, notice that the SQRT sign could be placed ahead of the whole expression. Then we can see that K1-K2 is the portion of incident power reflected and K1+K2 is the total incident power, so the formula is trivial and not very enlightening. Reflection Coefficient is specified in terms of the fields (or voltages) rather than the power, so we take a square root...

Are you saying that the energy is proportional to the SQRT of the dialectic constant, K?
 
Thread 'Gauss' law seems to imply instantaneous electric field propagation'

Thread 'Gauss' law seems to imply instantaneous electric field propagation'

Imagine a charged sphere at the origin connected through an open switch to a vertical grounded wire. We wish to find an expression for the horizontal component of the electric field at a distance ##\mathbf{r}## from the sphere as it discharges. By using the Lorenz gauge condition: $$\nabla \cdot \mathbf{A} + \frac{1}{c^2}\frac{\partial \phi}{\partial t}=0\tag{1}$$ we find the following retarded solutions to the Maxwell equations If we assume that...
View full post »
Thread 'A scenario of non-uniform circular motion'

Thread 'A scenario of non-uniform circular motion'

(All the needed diagrams are posted below) My friend came up with the following scenario. Imagine a fixed point and a perfectly rigid rod of a certain length extending radially outwards from this fixed point(it is attached to the fixed point). To the free end of the fixed rod, an object is present and it is capable of changing it's speed(by thruster say or any convenient method. And ignore any resistance). It starts with a certain speed but say it's speed continuously increases as it goes...
View full post »

Thread 'Do electron density waves accompany EM waves in coaxial cables?'

Maxwell’s equations imply the following wave equation for the electric field $$\nabla^2\mathbf{E}-\frac{1}{c^2}\frac{\partial^2\mathbf{E}}{\partial t^2} = \frac{1}{\varepsilon_0}\nabla\rho+\mu_0\frac{\partial\mathbf J}{\partial t}.\tag{1}$$ I wonder if eqn.##(1)## can be split into the following transverse part $$\nabla^2\mathbf{E}_T-\frac{1}{c^2}\frac{\partial^2\mathbf{E}_T}{\partial t^2} = \mu_0\frac{\partial\mathbf{J}_T}{\partial t}\tag{2}$$ and longitudinal part...
View full post »

Similar threads

Borehole / Ground penetrating radar research opportunities
Replies
4
Views
3K
A "The 7 Strangest Coincidences in the Laws of Nature" (S. Hossenfelder)
2
Replies
62
Views
9K
Dielectric constant in the energy density function
Replies
5
Views
8K
Longitudinal Waves in Air (Experimentally determining the speed of sound)
Replies
6
Views
3K
Does Inserting a Dielectric Affect Voltage and Ground Resistivity?
Replies
3
Views
26K
Bohr Model applied to Excitons
Replies
4
Views
5K
I Some questions about Cosmic Microwave Background radiation
Replies
13
Views
6K
Sending drive Pulse in CQED and visualize the state by QuTip
Replies
6
Views
3K
The Perry Report on USA Electric Power
Replies
6
Views
3K
Comments on a discussion please
Replies
1
Views
3K

Hot Threads

Recent Insights

Back
Top