Guidelines for a general OLED interface

  • Thread starter Thread starter Basher1
  • Start date Start date
  • Tags Tags
    General Interface
AI Thread Summary
To interface an OLED module with a Tiva launchpad, a display with a SPI serial interface is recommended, as this is compatible with the now-sold-out booster pack. Users can explore various OLED modules available on the market that support SPI. The discussion highlights the importance of selecting the right display for successful integration. Resources for purchasing OLED displays, such as eBay listings, are provided for further research. Overall, creating a custom solution for the OLED interface is feasible with the right components.
Basher1
Messages
27
Reaction score
0
I recently bought a Tiva launchpad and have been playing around with it for the last couple of weeks. I wanted to interface an OLED module to it and was wondering what the options for this was? There is a booster pack available but this is now sold out, so I suppose that I have to create my own. Any thoughts and guidance on this would be greatly appreciated.
 
Engineering news on Phys.org
Basically you need to buy an OLED display with a SPI serial interface. That is what is used in the booster pack. Any display with a SPI interface will work. You can research OLED modules.

For example http://www.ebay.com/itm/0-96-I2C-IIC-SPI-Serial-128X64-OLED-LCD-LED-Display-Module-for-Arduino-white-/181287662115
 
Last edited:

Thread '3-terminal device external modeling'

Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
View full post »
Thread 'Weird near-field phenomenon I get in my EM simulation'

Thread 'Weird near-field phenomenon I get in my EM simulation'

I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
View full post »

Similar threads

Open Source Humanitarian Demining Project
Replies
13
Views
4K
Need help building a Near Infrared Spectroscopy Device
Replies
2
Views
5K
MHB Determining asset value using historical stats
Replies
1
Views
2K
Mini Electric Horse Fence, or Micro-Taser?
Replies
41
Views
6K
Admissions Can someone critique my statement of purpose? (Master's Degree in Quantum Engineering)
Replies
8
Views
4K
Studying Advice Needed: Seeking Help with Math & Physics for Engineering Studies
Replies
16
Views
2K
Causing periodic storm events on a fictional planet
Replies
9
Views
2K
I need some kind of propellant gas for an experiment
Replies
6
Views
2K
Elevated EMF / AC magnetic fields in home
Replies
11
Views
4K
Courses Teaching quality of Coursera math courses after platform re-design?
Replies
2
Views
2K

Hot Threads

Recent Insights

Back
Top