Hey guys me solve these questions (Electrical(electronics) Engineering)

  • Thread starter Thread starter hot_sauce
  • Start date Start date
  • Tags Tags
    Engineering Hey
AI Thread Summary
The discussion revolves around a student seeking urgent help with an electrical engineering assignment due in two days. The assignment includes questions on equivalent resistance, capacitor voltage and charge, electromagnetic induction, and mesh equations. The student has managed to solve some questions but struggles with others, particularly those involving mesh analysis and calculating weekly consumption for a factory's electrical loads. Forum members emphasize the importance of showing work before receiving help and suggest reviewing relevant concepts and resources. Ultimately, the student reports successfully solving all questions but remains uncertain about the accuracy of their solution for question five.
hot_sauce
Messages
24
Reaction score
0
Hey guys please help me solve these questions !(Electrical(electronics) Engineering)

ok guys, I was on a vacation, and when I came back the professor just handed out an assignment, and I have no clue about it !

Please please, I really need your help on this. The assignment is due on the 28th ! Please I beg you to solve this for me !

I came back late, so I only have 2 days for it, as the rest of the class had the whole week ! pleaseeeeeeeeee i really need your help!these are the questions :
Q1) Find the equivalent resistance at terminals A-B in the circuit.

Q1.jpg
------------------------------------------------------------------------

Q2) Find the voltage across and charge on each capacitor for the network below :

Q2.jpg


----------------------------------------------------------------------------

Q3) State and prove the law :-

e=Ndφ/dt
--------------------------------------------------------------------------------Q4) Find Vo in the network :

Q3.jpg


-------------------------------------------------------------------------------

Q5) A factory has a 240-V supply from which the following loads are taken :

Lightning: Three hundred 150kW, four hundred 100W, and five hundred 60W lamps.

Heating : 100kW
Motors : A total of 44.76kW with an average efficiency of 75%

Misc. : Various loads taking a current of 40AAssuming that the lightning load is on for a period of 4 hours a day, the heating for 10 hours a day, and the remaining for 2 hours a day.

Calculate the weekly consumption of the factory in Kwh when working on a 5 day week.

---------------------------------------------------------------------------
Q6) Use Mesh equations to find the current through 10 Ohm resistors.


q4.jpg
 
Physics news on Phys.org
Come on, try and make an attempt.

Q1. Use the formulas for getting the total resistance of resistors in series and resistors in parallel separately.
Q2. Learn how to calculate total capacitance of capacitors in parallel
Q3. Read up on electromagnetic induction
Q4. Same principles as question 1.
Q5. Read up on Ohm's law and Coulomb's Law.
Q6. Read up on mesh analysis.

You have enough time to learn this in two days trust me.
 
Last edited:
Ed Aboud said:
Come on, try and make an attempt.

Q1. Use the formulas for getting the total resistance of resistors in series and resistors in parallel separately.
Q2. Learn how to calculate total capacitance of capacitors in parallel
Q3. Read up on electromagnetic induction
Q4. Same principles as question 1.
Q5. Read up on Ohm's law and Coulomb's Law.
Q6. Read up on mesh analysis.

You have enough time to learn this in two days trust me.

well I have solved Q no.1 and Q no.4, but I am STRUGGLING with the rest, pleaaase help :(
 
hot_sauce said:
well I have solved Q no.1 and Q no.4, but I am STRUGGLING with the rest, pleaaase help :(

Please read the forum rules: you need to show some work before we can help you with homework questions.
 
Qno.1)
the 3 kOhm + 6 kOhm = 9 kOhm, which is in parallel with the 18 kOhm resistor. 1/R = 1/18 + 1/9. R = 6 kOhm. So, overall, that part has 6 kOhms in resistance. adding the other two resistors that are in series, 6 + 6 + 10 = 22 kOhm. the equivalent resistance is 22 kOhms.Also Q no,3 I got help from wikipedia and I've got that done now.

So I onlyneed help with Q no.2,5 and 6.
 
trust me bro, I would have solved the other ones if I could but I cant. Its not that I am not investing time into studying and solving them myself, its that I don't have anymore time !

The Mesh equation question is totally out of knowledge, since he taught that while I was gona and gave this assignment.

I really need the marks on this assignment, since I've been a little off in this course.

I really need help please.
 
Read through your notes or textbook on mesh analysis first.

If you want to read something online, try this:
http://www.allaboutcircuits.com/vol_1/chpt_10/3.html
http://mysite.wanadoo-members.co.uk/phil_robinson/mesh.html
 
Last edited by a moderator:
thanks for the help guys, I solved all of them, but I am not sure if I got Q no.5 right
 
Back
Top