Horizontal Gear with Upward Pointing Teeth: Myth or Reality?

  • Thread starter Thread starter TheCollector
  • Start date Start date
  • Tags Tags
    Gear
AI Thread Summary
Horizontal gears with upward-pointing teeth, known as face gears, do exist but are less common than conical gears due to their efficiency. While they can be custom manufactured, they are not readily available on major gear supply websites like SDP-SI or Boston Gear. Alternatives such as bevel gears or ring and pinion systems may be more practical for certain applications. The discussion highlights the niche use of face gears and the challenges in sourcing them. Custom manufacturing is likely necessary for those seeking face gears.
TheCollector
Messages
4
Reaction score
0
is there such thing as a gear that when laid horizontally has teeth that point up intead of out or in?
 
Engineering news on Phys.org
Yup, although not commonly used as conical gears do their job better.
 
They would probably have to be custom manufactured. Can you not use another type, like bevel gears or ring & pinion?
 
Thread 'How can I find the cleanout for my building drain?'

Thread 'How can I find the cleanout for my building drain?'

I am a long distance truck driver, but I recently completed a plumbing program with Stratford Career Institute. In the chapter of my textbook Repairing DWV Systems, the author says that if there is a clog in the building drain, one can clear out the clog by using a snake augur or maybe some other type of tool into the cleanout for the building drain. The author said that the cleanout for the building drain is usually near the stack. I live in a duplex townhouse. Just out of curiosity, I...
View full post »

Thread 'Query on Isentropic relationships (such as PV^gamma = constant)'

Hi all, I have a question. So from the derivation of the Isentropic process relationship PV^gamma = constant, there is a step dW = PdV, which can only be said for quasi-equilibrium (or reversible) processes. As such I believe PV^gamma = constant (and the family of equations) should not be applicable to just adiabatic processes? Ie, it should be applicable only for adiabatic + reversible = isentropic processes? However, I've seen couple of online notes/books, and...
View full post »

Similar threads

A novel compound epicyclic gear system I can't seem to understand
Replies
1
Views
1K
Fixed gear ratio and correction tape
Replies
6
Views
2K
Finding coincident angle between 2 equally spaced sets
Replies
1
Views
1K
Why is the gear ratio reversed in a planetary gear system?
Replies
9
Views
3K
Gear on fixed rack, force analysis
Replies
13
Views
2K
How do I select the right motor and gear ratio for a mid-drive e-Bike?
Replies
2
Views
4K
How Does Gear Interference Affect Gearbox Design and Longevity?
Replies
1
Views
4K
For gear teeth to linear shaft, what's the center point?
Replies
2
Views
2K
Rack and Pinion motor selection
Replies
3
Views
2K
How Do You Calculate Gear Train Efficiency Based on Load Torque?
Replies
13
Views
7K

Hot Threads

Recent Insights

Back
Top