How Can SolidWorks Help Calculate Air Flow in a Hamster Cage?

AI Thread Summary
SolidWorks can be utilized to calculate airflow in a hamster cage by employing Computational Fluid Dynamics (CFD) simulations, specifically using the Large Eddy Simulation (LES) model for accurate results. Key objectives include improving oxygen levels, reducing odors, and minimizing bacterial growth through antimicrobial design. To achieve this, calculations can be based on Bernoulli's equation and Darcy-Weisbach equations. Learning to effectively use SolidWorks' fluid simulation tool is essential for implementing these calculations in the design. For further guidance on ventilation and HVAC design, resources are available at engineershouse.com.
jjssj
Messages
5
Reaction score
0
Hi

I'm creating a hamster cage for better ventilation(circulation) without too much flow.(draft)
How would I work out mathematically the air flow going into a plastic box. The flow rate etc..
The plastic box will be inside a normal home.

Things I want to know and improve
The overall oxygen level
Reducing smell/bacteria growth-antimicrobial
Implement calculations in a superior design.

Thanks
 
Engineering news on Phys.org
mathematically speaking in order to study such a simulation you need a CFD simulation using LES model for better expectations or you can make the design theoretically without getting into details using Bernoulli's equation and Darcy Weisbach equations, for more information on ventilation design in specific and HVAC design in general visit : http://www.engineershouse.com/
 
I'm using solidworks, i thought that would be the best way.
Just have to learn how to use the fluid simulation tool

Thanks
 
Last edited by a moderator:

Thread 'Bubble formation in 4 mm gap vessel'

How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Find 3D Printer & Software Resources for Prototype Creation'

I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
View full post »

Similar threads

Doublet flow in Fluid Dynamics between two spheres or cylinders
Replies
0
Views
1K
How Can I Calculate Flow Pressure Drop in a Two-Dimensional Diffuser?
Replies
7
Views
9K
Model pressure loss vs time for air in a cylinder w/ hole
Replies
15
Views
4K
Pressure and velocity calculation for microchannel. pls help
Replies
2
Views
2K

Hot Threads

Recent Insights

Back
Top