How does Faraday's Law apply to changing magnetic flux?

AI Thread Summary
Faraday's Law states that a change in magnetic flux through a surface induces an electric current. This induced current arises from an electric field, with its direction determined by the right-hand rule. The magnetic field (B) changes when a magnet approaches a conductive loop, as the field strength varies with distance and orientation. Even in non-conservative systems, Faraday's Law remains valid because it relates to the fundamental principles of electromagnetism. Understanding the dynamics of magnetic fields and their interactions with conductive materials is essential for grasping the law's applications, such as in generators.
Winzer
Messages
597
Reaction score
0
Ok so we are studying Faradays law right now and am a little confused. I will try and state my understanding of it, please correct of wrong.

If we have a change in magnetic flux in a certain area in space there is an induced current. This current must obvoiusly come from an electric field whos direction comes from the right hand rule , the thumb point opposite to the direction of change in the magnetic field and curls.

But there are a number of things that elude me:
1) Faradays law always hold-->>even for non conservative system, how and why?
2) How exactly do you determin change in B?
For example if I have a magnet pointing north and move it towards a ring at a nonuniform velocity, the ring is facing the magnet through its opening, is there a change in B?
How about at different orientations of the magnet? This is where am just beyond confused, especially with different oreintations.

Are there any books/supplements you guys can recommend? In desperate need.
Thanks
 
Physics news on Phys.org
Holy Cow nothing yet!?
 
Winzer said:
Holy Cow nothing yet!?

Well, apparently it was a big party weekend at many universities this weekend... I wasn't invited, so that's not my excuse, however :rolleyes:

I'll try to answer a part of your question -- The B field diverges as it traces away from a permanent magnet, so Yes, as you move a permanent magnet closer to a ring, the B field cutting through the area of the ring increases:

http://en.wikipedia.org/wiki/Magnet

So moving a permanent magnet closer to a metallic ring will induce a current in that ring.
 
Faraday's law is one of the four Maxwell's equations. Its place in the theory of electromagnetism is thus comparable to one of Newton's laws in classical mechanics. So it always holds.

You have to consider why and if the flux changes in a particular situation. It could be because the field strength changes in time, or because you move the ring through a nonuniformmagnetic field, or because the loop bounding the surface is changing shape.
 
Well the answer of the question "How the magnetic field changes?" is this that the magnetic field around any magnet or around any charge particle depends upon the strength of the charge or magnet. As we move away from the magnet the field becomes weaker so when a magnet brings close to coil then obiviously there will be change in magnetic field
 
Winzer said:
But there are a number of things that elude me:
1) Faradays law always hold-->>even for non conservative system, how and why?
Not sure what you mean by that question, sorry.

2) How exactly do you determin change in B?
For example if I have a magnet pointing north and move it towards a ring at a nonuniform velocity, the ring is facing the magnet through its opening, is there a change in B?
How about at different orientations of the magnet? This is where am just beyond confused, especially with different oreintations.

Think of the flux density. Picture the old high school iron magnet with the filings sprinkled around it. The more lines the higher the density. As you move the magent towards the ring, whether uniform or not, the number of flux lines intersecting the ring changes. Increasing or decreasing depending on direction of travel and orientation.

Specifically about orientation: The magnet doesn't even have to move towards the ring. Just imagine a standard bar magnet spinning in place with first one pole facing the ring, then a side, then the other pole, then the other side and back to the first pole. As the flux density is higher at the poles than the long sides (same flux, spread over a larger area) then B will float up and down across the ring as the magnet spins. It's the basis for how generators function.
 
This is from Griffiths' Electrodynamics, 3rd edition, page 352. I am trying to calculate the divergence of the Maxwell stress tensor. The tensor is given as ##T_{ij} =\epsilon_0 (E_iE_j-\frac 1 2 \delta_{ij} E^2)+\frac 1 {\mu_0}(B_iB_j-\frac 1 2 \delta_{ij} B^2)##. To make things easier, I just want to focus on the part with the electrical field, i.e. I want to find the divergence of ##E_{ij}=E_iE_j-\frac 1 2 \delta_{ij}E^2##. In matrix form, this tensor should look like this...
Thread 'Applying the Gauss (1835) formula for force between 2 parallel DC currents'
Please can anyone either:- (1) point me to a derivation of the perpendicular force (Fy) between two very long parallel wires carrying steady currents utilising the formula of Gauss for the force F along the line r between 2 charges? Or alternatively (2) point out where I have gone wrong in my method? I am having problems with calculating the direction and magnitude of the force as expected from modern (Biot-Savart-Maxwell-Lorentz) formula. Here is my method and results so far:- This...
Back
Top