How fast was the car traveling?

  • Thread starter Thread starter PhysicBeginner
  • Start date Start date
  • Tags Tags
    Car
AI Thread Summary
The discussion revolves around two physics homework questions regarding car speed and force during an accident. For the first question, the calculations indicate that the car was traveling at a velocity of 28 m/s based on the length of tire marks and the coefficient of static friction. In the second question, the force acting on a 60 kg person involved in a collision with a tree was calculated to be 12,840 N, derived from the deceleration experienced during the crash. The participant expresses uncertainty about the second answer, feeling it may be excessively high. Overall, the calculations for both questions are presented for verification.
PhysicBeginner
Messages
35
Reaction score
0
Homework question

Hi everyone. I just finished 2 questions but I'm not sure if the answer is right. So can anyone help me check it?
The first question is:
"Police find the tire tracks of a car that lost control and caused an accident. They want to know if the car was speeding. They determine that μs=0.65 for it's tire on this road. The tire marks are 126m long. How fast was the car traveling?"
Answer:
Fcar(the force of the car)
Fcar= μsFn Fn=mg
Fcar= μsmg
Fcar=ma
ma=μsmg
cross out the m
a=μsg
a=0.65*9.8
=6.37m/s^2
d=vt
t=v/a
d=v*(v/a)
126=v^2/6.37
v=28m/s
The velocity of the car was 28m/s
The second question is "Calculate the force acting on the body of a 60kg person who is involved in an accident. His car hits a tree while going 15m/s. The car comes to a stop with the tree embedded 1.1m into it."
Answer:
t=d/v
=1.1m / 15m/s
=0.07s
a=v/t
a=15m/s / 0.07s
=214m/s^2
Fbrake(The force of the break)
Fbrake=ma
=60*214
=12840N
So the force acted upon the person is 12840N
I'm not really sure of question 2's answer cause it seems a bit too big.
 
Last edited:
Physics news on Phys.org
So can anyone check this? Thanks
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top