How Is the Swing Angle Determined in a Ballistic Pendulum Problem?

AI Thread Summary
The discussion focuses on determining the swing angle of a ballistic pendulum after a bullet collides with a block. The initial height calculated using conservation of energy is 0.0528 m, which is confirmed as correct. However, the application of conservation of energy is clarified to only apply after the inelastic collision, not during it. The angle of swing is calculated using trigonometric functions, with initial attempts yielding different results due to misunderstanding the relationship between height and angle. The conversation emphasizes the importance of correctly applying physics principles to solve for the swing angle.
Punchlinegirl
Messages
221
Reaction score
0
A bullet (m = 0.0270 kg) is fired with a speed of 99.00 m/s and hits a block (M = 2.60 kg) supported by two light strings as shown, stopping quickly. Find the height to which the block rises.
I found this by conservation of energy, the answer was .0528 m
Find the angle (in degrees) through which the block rises, if the strings are 0.280 m in length.
I tried doing this using trig.
the hypotenuse= .280 m
opposite = (.280-.0528) = .2272 m
adjacent= x
sin^-1 (.2272/.280)= 54.2 deg.

What am I doing wrong?
 
Physics news on Phys.org
if the hypotunse is .28 and the vertical side is

.28 - .0528 = .2272

so the side opp is

sqrt(.28^2-.2272^2) = .163

so sin^-1 = .163 / .28 = 35.76 degrees
 
Punchlinegirl said:
A bullet (m = 0.0270 kg) is fired with a speed of 99.00 m/s and hits a block (M = 2.60 kg) supported by two light strings as shown, stopping quickly. Find the height to which the block rises.
I found this by conservation of energy, the answer was .0528 m
Find the angle (in degrees) through which the block rises, if the strings are 0.280 m in length.
I tried doing this using trig.
the hypotenuse= .280 m
opposite = (.280-.0528) = .2272 m
adjacent= x
sin^-1 (.2272/.280)= 54.2 deg.
What am I doing wrong?
I am not sure what you have done because you have not shown your work explaining your answer of .0528 m for the height.

Conservation of energy does not apply to the collision. The bullet collides with the pendulum and stops inside it. This is an inelastic collision. What is conserved in the collision? Conservation of energy applies after the collision when the bullet and pendulum bob move together. (Edit: your answer .0528 m appears to be correct).

What is the height the pendulum reaches in terms of its initial velocity (after stopping the bullet)? How is the height related to angle of swing?

AM
 
Last edited:
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanged mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top