How much ice melts when a projectile is fired at it?

  • Thread starter Thread starter Walley1
  • Start date Start date
  • Tags Tags
    Ice Projectile
AI Thread Summary
A projectile weighing 0.025 kg is fired at 240 m/s into ice at 0 degrees C, and the kinetic energy is calculated as 720 J. The heat of fusion for ice is noted as 3.35x10^5 J/kg. The mass of ice that melts is determined by dividing the kinetic energy by the heat of fusion, resulting in approximately 0.002 kg of melted ice. The discussion confirms that the calculations are correct, emphasizing the omission of rotational kinetic energy. The heat lost by the projectile while cooling from 30 to 0 degrees C is ignored as per the problem's instructions.
Walley1
Messages
10
Reaction score
0

Homework Statement


Newt needs to melt some ice, so he fires a test projectile (0.025 kg) at 30.0 degrees C at a speed of 240 m/s into a large block of ice at 0 degrees C, in which it becomes embedded (comes to rest). Approximately what mass of ice melts? (i.e. ignore the heat lost by the projectile in going from 30-0 degrees C).


Homework Equations


e=(mv^2)/2


The Attempt at a Solution


The heat of fusion of water is 3.35x10^5J.
e=(0.025 * 240^2)/2=720J
720J/3.35x10^5J=0.002, so 0.002kg of ice melts.
I get the feeling that's incorrect, especially since I didn't do anything with the temperature (although it mentions that I should ignore the heat lost by the projectile).

Thanks for any help you can provide.
 
Physics news on Phys.org
Energy release of the projectile is its kinetic energy. So assuming the ice is at 0 C, the amount that melts equals the projectile KE divided by the latent heat of the ice. The rotational kinetic energy of the projectile is omitted. This is what you have done and it is correct. I assume the heat of fusion of ice is 3.35X10^5 J/kg. You left off the kg.
 
LawrenceC said:
Energy release of the projectile is its kinetic energy. So assuming the ice is at 0 C, the amount that melts equals the projectile KE divided by the latent heat of the ice. The rotational kinetic energy of the projectile is omitted. This is what you have done and it is correct. I assume the heat of fusion of ice is 3.35X10^5 J/kg. You left off the kg.

Thanks a million!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top