How to Find I1 in a Circuit with Multiple Elements

  • Thread starter Thread starter IKu
  • Start date Start date
  • Tags Tags
    Circuits
AI Thread Summary
To find I1 in the given circuit, apply Ohm's law using the known voltage drop across R1 or R2. Alternatively, analyze the bottom loop with the equation Vc = R3*(I1 + Is), which will yield the same result. The discussion clarifies that understanding these relationships simplifies the process of finding I1. A question arises about whether Vc can exceed Va, indicating further exploration of voltage relationships in the circuit. Overall, the conversation emphasizes using fundamental circuit analysis techniques to solve for unknown currents.
IKu
Messages
9
Reaction score
0
i'm having trouble with a circuit i got for class and was looking for some help... hopefully this is the right place. i can't figure out how to find I1 for this circuit:
https://netfiles.uiuc.edu/ericlin/www/circuit.jpg

if someone could just explain how to find I1 that would be nice. thanks!
 
Last edited by a moderator:
Engineering news on Phys.org
Well, you know the voltage drop across R1, so why don't you just use Ohm's law? You could do the same for the voltage drop across R2 if you'd rather. Or you could even look at the bottom loop, where Vc = R3*(I1 + Is). All three will give you the same answer.
 
ahh... that makes a lot more sense than what i was doing... quick question, could Vc ever be greater than Va in a situation like this? thanks for your help!
 

Thread 'How might electronics be different if AC voltage was 72V at 45 Hz?'

Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
View full post »

Thread 'Why does the amperage go real high if there is a low voltage short?'

I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
View full post »
Thread 'Electromagnet magnetic field issue'

Thread 'Electromagnet magnetic field issue'

Hi Guys We are a bunch a mechanical engineers trying to build a simple electromagnet. Our design is based on a very similar magnet. However, our version is about 10 times less magnetic and we are wondering why. Our coil has exactly same length, same number of layers and turns. What is possibly wrong? PIN and bracket are made of iron and are in electrical contact, exactly like the reference design. Any help will be appreciated. Thanks. edit: even same wire diameter and coil was wounded by a...
View full post »

Similar threads

How to make an Electrical Diagram with added Steinmetz Circuit for a Delta 3 phase motor?
Replies
0
Views
2K
Solve Black Box Circuits w/ Switch & w/o Switch
Replies
12
Views
5K
Finding the resonant frequency of this "discriminator" demod circuit.
Replies
2
Views
2K
Engineering AC Circuit Phasors: Find I1, I2, I3
Replies
26
Views
3K
How does AM broadcasting/receiving work + a project for HS students?
Replies
20
Views
1K
RC Phase Shift Oscillator not Oscillating
Replies
41
Views
7K
Increasing the Battery Life of an LED Circuit
Replies
26
Views
4K
Solving Power Delivery Issues in a 5V Series Circuit with a 1.5V Rated Relay
Replies
12
Views
3K
Thermal Noise in Electrical Circuits
Replies
10
Views
8K
Build a H-Bridge Circuit: Tips & Info
Replies
10
Views
8K

Hot Threads

Recent Insights

Back
Top