How to solve a complex equation to get the current?

AI Thread Summary
The discussion focuses on deriving the current from a complex equation involving an inductor, resistor, and capacitor in series with an alternating voltage source. The equation presented is V=(iωL+R+1/iωC)I, which results in a complex value for current. To find the current, the impedance |Z| and phase φ are defined, leading to the complex current expression I_complex = V_0 e^(iωt)/(|Z| e^(iφ)). The real part of the current is then expressed as I_real = V_0/|Z| cos(ωt - φ). The terms inductive reactance (X_L) and capacitive reactance (X_C) are also clarified for future reference.
Adesh
Messages
735
Reaction score
191
I was reading The Feynman Lectures on physics http://www.feynmanlectures.caltech.edu/I_23.html chapter 23, section 4. In it he derives the equation for current when inductor, resistor and capacitor is connected in series with an alternating voltage source, he derives this equation:-
V=(iωL+R+1/iωC)I
It's a complex equation, so if we are given Voltage, Inductance , Resistance and Capacitance the value we will get is a complex one, so how can we find current from this equation? How to use this equation ?

Thank you.
 
Physics news on Phys.org
Actually,
$$|Z| = \sqrt{R^2 + \left(\omega L - \frac{1}{\omega C}\right)^2}$$ and the phase is $$\phi = \tan^{-1}\left(\dfrac{\omega L - \frac{1}{\omega C}}{R}\right)$$ Your equation reduces to $$I_{complex} = \frac{V_0 e^{i \omega t}}{ |Z| e^{i \phi}}$$ for complex current. Take the real part, $$I_{real} = \frac{V_0}{|Z|} \cos(\omega t - \phi)$$
 
  • Like
Likes berkeman and Adesh
Wrichik Basu said:
Actually,
$$|Z| = \sqrt{R^2 + \left(\omega L - \frac{1}{\omega C}\right)^2}$$ and the phase is $$\phi = \tan^{-1}\left(\dfrac{\omega L - \frac{1}{\omega C}}{R}\right)$$ Your equation reduces to $$I_{complex} = \frac{V_0 e^{i \omega t}}{ |Z| e^{i \phi}}$$ for complex current. Take the real part, $$I_{real} = \frac{V_0}{|Z|} \cos(\omega t - \phi)$$
You have helped to a great extent. Thank you so much.
 
  • Like
Likes Wrichik Basu
As an addendum, the expression ##\omega L## is known as inductive reactance denoted by ##X_L##, and ##1/(\omega C)## is known as capacitive reactance denoted by ##X_C##. I believe you already know these, but I am posting this for future visitors.
 
  • Like
Likes Adesh
This is from Griffiths' Electrodynamics, 3rd edition, page 352. I am trying to calculate the divergence of the Maxwell stress tensor. The tensor is given as ##T_{ij} =\epsilon_0 (E_iE_j-\frac 1 2 \delta_{ij} E^2)+\frac 1 {\mu_0}(B_iB_j-\frac 1 2 \delta_{ij} B^2)##. To make things easier, I just want to focus on the part with the electrical field, i.e. I want to find the divergence of ##E_{ij}=E_iE_j-\frac 1 2 \delta_{ij}E^2##. In matrix form, this tensor should look like this...
Thread 'Applying the Gauss (1835) formula for force between 2 parallel DC currents'
Please can anyone either:- (1) point me to a derivation of the perpendicular force (Fy) between two very long parallel wires carrying steady currents utilising the formula of Gauss for the force F along the line r between 2 charges? Or alternatively (2) point out where I have gone wrong in my method? I am having problems with calculating the direction and magnitude of the force as expected from modern (Biot-Savart-Maxwell-Lorentz) formula. Here is my method and results so far:- This...
Back
Top