How to Solve Basic Kinematics Problems: Tips and Tricks

  • Thread starter Thread starter don123
  • Start date Start date
  • Tags Tags
    Kinematics
AI Thread Summary
The discussion focuses on solving basic kinematics problems involving projectile motion and free fall. The first problem involves a stone thrown upward from a cliff, where the user struggles to calculate the total time until it hits the bottom and its speed just before impact. The second problem concerns two stones dropped at different times, with the user needing help determining their separation when the second stone reaches a specific speed. Participants suggest verifying calculations and using appropriate kinematic equations, emphasizing the importance of showing detailed work to identify errors. Accurate application of formulas and careful attention to signs are crucial for solving these problems correctly.
don123
Messages
6
Reaction score
0
Hey Guys, here are my questions (with the work included.) Please tell me what I am doing wrong as it is not working on webassign.

A stone is thrown vertically upward with a speed of 15.0 m/s from the edge of a cliff 80.0 m high.

(a) How much later does it reach the bottom of the cliff?
s
(b) What is its speed just before hitting?
m/s
(c) What total distance did it travel?
m


Okay the answer to (c) is 102.9 m (it is the correct answer.)

For A (please open the attached picture if it helps.)

Basically I found the time from when the stone is thrown up to the time when the max height is reached. (velocity = 0) WIth that time, I doubled that to find the time until the 80 m cliff is reached. Then, I found the time it takes for the rock to reach the bottom of the cliff with the equation X= Vi(t) + .5at^2 (a = 9.8; x = 80; Vi = 15 and t = ?)

But unfortunately when I add up the two time measures, they are not working.
 

Attachments

  • 2_32.gif
    2_32.gif
    29.6 KB · Views: 510
Physics news on Phys.org
I need help with another problem (also kinematics) and I do not want to double-thread, hence I am just posting it here.

A stone is dropped from the roof of a high building. A second stone is dropped 3.00 s later. How far apart are the stones when the second one has reached a speed of 14.0 m/s?

Basically, I found Vi, Vf, X, A, T for the first stone and for the second stone. For the second stone, I found out at what time it is that the 14m/s velocity is reached. From there, I used basic kinematics formulas and then subtracted the answers, but that also is wrong. Any help will be greatly appreciated.
 
Your approach to solving the first problem should work. Have you done the math right? Have you used 'g' as the given in the question? (some times, the question may ask you to approximate 'g' as 10m/s^2)

For the second question, you could simply use the concept of relative velocities.
 
Last edited:
Can you show your working for the additional question. It saves us working through the whole problem if the error is arithmerical.
 
don123 said:
Basically I found the time from when the stone is thrown up to the time when the max height is reached. (velocity = 0) WIth that time, I doubled that to find the time until the 80 m cliff is reached. Then, I found the time it takes for the rock to reach the bottom of the cliff with the equation X= Vi(t) + .5at^2 (a = 9.8; x = 80; Vi = 15 and t = ?)
As siddharth noted, this approach should work just fine. Show the details of what you did and we can check for errors. You can also solve this in a single step using:
y = y_0 + v_0 t + .5 a t^2
with the appropriate values for y, y_0, v_0, and a. (Mind the signs.)

For your second problem:
A stone is dropped from the roof of a high building. A second stone is dropped 3.00 s later. How far apart are the stones when the second one has reached a speed of 14.0 m/s?

Basically, I found Vi, Vf, X, A, T for the first stone and for the second stone. For the second stone, I found out at what time it is that the 14m/s velocity is reached. From there, I used basic kinematics formulas and then subtracted the answers, but that also is wrong. Any help will be greatly appreciated.
Again, nothing obviously wrong here, but the devil is in the details. Show how you found the time for the second stone to reach the stated speed, etc., and we can try and spot your error.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top