How to Use a Lock-In Amplifier for Johnson Noise Experiments

  • Thread starter Thread starter JamesJames
  • Start date Start date
  • Tags Tags
    Amplifier Lock
AI Thread Summary
Resources for using a Lock-In Amplifier in Johnson Noise experiments are sought, particularly guidance beyond the "Art of Experimental Physics by Preston and Dietz." The discussion highlights the importance of understanding low pass filters and their roll-off characteristics, noting that a 24 dB/octave roll-off can enhance signal-to-noise ratios. However, questions arise regarding the use of lower order filters, specifically when a 6 dB/octave filter might be preferable. Clarification on the practical applications and advantages of different filter orders is requested. The conversation emphasizes the need for comprehensive resources to effectively utilize Lock-In Amplifiers in experimental setups.
JamesJames
Messages
204
Reaction score
0
Is there a book or website that explains throughly how to use a Lock In Amplifier? I have never used one before and am using it in a Johnson Noise experiment with the "Art of Experimental Physics by Preston and Dietz" acting as the lab manual.
 
Engineering news on Phys.org
http://www.cpm.uncc.edu/programs/tn1000.pdf
 
Last edited by a moderator:
help

Dear all,

I understand the meaning of low pass filter and roll off in Lock-in amplifiers (I think at least). Pratically, the 24db/octave roll off should be better for a grater signal to noise ratio.

So. why there is the possibility to use lower order filters? When I should prefere a 6db/octave filter?

thank you all for help
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top