Impedance of Circuit (Complex Numbers Question)

Irishdoug
Messages
102
Reaction score
16
Homework Statement
Find the impedance of the circuit shown (R and L in series and then C in parallel with them).
Relevant Equations
##Z = R +i(\omega L - \frac{1}{\omega C})##
##V_{R} = RI_{0}sin(\omega t)##
##V_{L} = \omega LI_{0}cos(\omega t)##
##V_{C} = -\frac{1}{\omega C}I_{0}cos(\omega t)##
Question is from Boas Ch. 2 Q.41 (I've the first edition) or Q 16.8 in the 3rd edition.

Find the impedance of the circuit shown (R and L in series, then C in parallel with them). Circuit is essentially this (it is a closed circuit which I can't easily draw).
-----R------L---
-------C---------

I know ##Z = R +i(\omega L - \frac{1}{\omega C})## = ## \frac{V_{R} + V_{L} + V_{C}}{I}## but I'm not sure exactly what I need to do, or where to start, other than sub in the equations for ##V_{R}, V_{L}## and ##V_{C}##. Any help appreciated.
 
Physics news on Phys.org
Irishdoug said:
I'm not sure exactly what I need to do
  1. Post a complete homework problem statement
  2. Read the text of the chapter
  3. Reconsider your relevant equations -- two out of three are unusable in this context
  4. ##Z = R +i(\omega L - \frac{1}{\omega C})## is not correct (that equation is for RLC in series)
Are you familiar with complex numbers ?
 
  • Like
Likes Irishdoug
BvU said:
  1. Post a complete homework problem statement
  2. Read the text of the chapter
  3. Reconsider your relevant equations -- two out of three are unusable in this context
  4. ##Z = R +i(\omega L - \frac{1}{\omega C})## is not correct (that equation is for RLC in series)
Are you familiar with complex numbers ?
Yes I am familiar with complex numbers. It is the electronics part I'm struggling with. I'm aware then that the formulas for resistors in parallel and series apply to impedance, Z. I realize I don't need the Voltage equations. As such, I'm trying to figure out the correct equation for Z. I thought it applied to circuits in general. It is not stated that it is only for RLC in series in the text.

I'm thinking so far:

##Z_{R} = R##
##Z_{L} = i\omega L##
##Z_{C} = \frac{1}{i\omega C}####Z_{R} + Z_{C} = Z_{series} = R+i\omega L##.

Then, ##Z_{parallel} = \frac{1}{Z_{series}} + (\frac{1}{i\omega C})^{-1}##

Does this look any better?
 
No :wink: ! $$ {1\over Z_{\sf parallel} }= \frac{1}{Z_{\sf series}} + \left (\frac{1}{i\omega C}\right )^{-1} $$

looks better, but we still don't know what we are looking for in this exercise.
 
  • Like
Likes Irishdoug
BvU said:
No :wink: ! $$ {1\over Z_{\sf parallel} }= \frac{1}{Z_{\sf series}} + \left (\frac{1}{i\omega C}\right )^{-1} $$

looks better, but we still don't know what we are looking for in this exercise.
Ah you are right. I am just looking for the equation for the total impedance for the circuit. So ##Z = R+i(\omega L - \frac{1}{\omega C})## is the impedance for an RLC in series as BvU pointed out. I need to find it for the circuit I have.
 
Irishdoug said:
I am just looking for the equation for the total impedance for the circuit.
Without a circuit diagram, it's not clear what "total impedance for the circuit" means. Here's a reproduction of the diagram of the circuit in the book.
Untitled 2.png

Those two little wires at the end clears up what you're looking for. The implication is that if an AC voltage V is applied across those two wires, the circuit will draw a current I, and the impedance, by definition, is V/I.
 
##|\Psi|^2=\frac{1}{\sqrt{\pi b^2}}\exp(\frac{-(x-x_0)^2}{b^2}).## ##\braket{x}=\frac{1}{\sqrt{\pi b^2}}\int_{-\infty}^{\infty}dx\,x\exp(-\frac{(x-x_0)^2}{b^2}).## ##y=x-x_0 \quad x=y+x_0 \quad dy=dx.## The boundaries remain infinite, I believe. ##\frac{1}{\sqrt{\pi b^2}}\int_{-\infty}^{\infty}dy(y+x_0)\exp(\frac{-y^2}{b^2}).## ##\frac{2}{\sqrt{\pi b^2}}\int_0^{\infty}dy\,y\exp(\frac{-y^2}{b^2})+\frac{2x_0}{\sqrt{\pi b^2}}\int_0^{\infty}dy\,\exp(-\frac{y^2}{b^2}).## I then resolved the two...
Hello everyone, I’m considering a point charge q that oscillates harmonically about the origin along the z-axis, e.g. $$z_{q}(t)= A\sin(wt)$$ In a strongly simplified / quasi-instantaneous approximation I ignore retardation and take the electric field at the position ##r=(x,y,z)## simply to be the “Coulomb field at the charge’s instantaneous position”: $$E(r,t)=\frac{q}{4\pi\varepsilon_{0}}\frac{r-r_{q}(t)}{||r-r_{q}(t)||^{3}}$$ with $$r_{q}(t)=(0,0,z_{q}(t))$$ (I’m aware this isn’t...
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
Back
Top