Input and output voltages and amps on my laptop's charger

AI Thread Summary
The charger for a laptop operates as a transformer that converts high voltage from a wall outlet (100-240V) to a lower voltage required by the laptop (19V). The input voltage is higher to prevent damage to the laptop, while the output voltage is specifically designed for the laptop's operational needs. The difference in amperage is due to the relationship defined by the power equation P=IV, where power (P) equals current (I) times voltage (V). The charger can draw up to 1.5 amps from the wall but can supply up to 3.42 amps to the laptop at a lower voltage. The current drawn by the laptop varies based on its usage; intensive tasks require more power, causing the transformer to heat up.
bluemoonKY
Messages
130
Reaction score
16
The wire on the charger that came with my laptop eventually frayed, and I had to buy a new charger for my laptop. Both the new and old chargers for my laptop plug into a standard wall outlet. On the new charger, it says the following: " Input: 100-240V ~ 1.5A 50-60Hz Output: 19V --3.42A 65W MAX. "

I assume that the V stands for voltage, and the A stands for amps. But why is there a different voltage for input and output? What is the meaning of input and output? Why is there a different amperage for input and output?
 
Computer science news on Phys.org
bluemoonKY said:
The wire on the charger that came with my laptop eventually frayed, and I had to buy a new charger for my laptop. Both the new and old chargers for my laptop plug into a standard wall outlet. On the new charger, it says the following: " Input: 100-240V ~ 1.5A 50-60Hz Output: 19V --3.42A 65W MAX. "

I assume that the V stands for voltage, and the A stands for amps. But why is there a different voltage for input and output? What is the meaning of input and output? Why is there a different amperage for input and output?
Google "electrical transformers" (your charger is a transformer)
 
bluemoonKY said:
But why is there a different voltage for input and output? What is the meaning of input and output? Why is there a different amperage for input and output?

Your laptop needs 19 volts to operate, but your wall socket provides 120 volts. The charger is a transformer that steps down the input voltage so it doesn't damage your laptop. It then outputs this stepped down voltage to your laptop.

The amperage is different because of the way the electronics work. To operate, your laptop needs electrical power. Power is given by the equation P=IV, or power equals current times voltage. This means that you can provide the same amount of power with different currents and voltage as long as their product is the same. Your laptop charger only takes in up to 1.5 amps, but it can supply up to 3.41 amps to the laptop at a reduced voltage. Note that the voltage required by the laptop remains the same during use, but the amount of current drawn by the laptop will change as you use it. If you're doing lots of processor/graphics intensive stuff you will draw more amps than if you just sit there at the desktop.
 
You can feel when the laptop draws more power by touching the transformer.
As you use more power (which is equivalent to more current) the transformer will heat up.
 
This week, I saw a documentary done by the French called Les sacrifiés de l'IA, which was presented by a Canadian show Enquête. If you understand French I recommend it. Very eye-opening. I found a similar documentary in English called The Human Cost of AI: Data workers in the Global South. There is also an interview with Milagros Miceli (appearing in both documentaries) on Youtube: I also found a powerpoint presentation by the economist Uma Rani (appearing in the French documentary), AI...
I have been idly browsing what Apple have to offer with their new iPhone17. There is mention of 'Vapour cooling' to deal with the heat generated. Would that be the same sort of idea that was used in 'Heat Pipes' where water evaporated at the processor end and liquid water was returned from the cool end and back along a wick. At the extreme high power end, Vapour Phase Cooling has been used in multi-kW RF transmitters where (pure) water was pumped to the Anode / or alternative Collector and...
Back
Top