Investigating Voltage-Inductance Relationship

  • Thread starter Thread starter rahul.6sept
  • Start date Start date
  • Tags Tags
    Relationship
AI Thread Summary
Inductance remains constant unless the current exceeds the saturation current of the inductor, at which point the inductance decreases. The relationship between voltage, inductance, and current is defined by the equation V = L(di/dt), indicating that a change in current over time results in induced voltage. A hypothetical scenario involving a copper wire with changing radius raises questions about how this would affect inductance. When current approaches saturation, the inductance drops significantly, as explained in resources like Wikipedia. Understanding these principles is crucial for analyzing inductive systems in electrical engineering.
rahul.6sept
Messages
5
Reaction score
0
Dear all,

I would like to know how exactly the inductance varies with change in applied voltage with respect to time and if there is any mathematical relation for the same available.

Regards,
rc
 
Physics news on Phys.org
V = L\frac{di}{dt}

Where V is voltage, L is inductance, i is current and t is time. There has to be a change in current else there will be no induced Voltage. So the greater the change in current, the greater the induced Voltage. Simple as that.
 
rahul.6sept said:
Dear all,

I would like to know how exactly the inductance varies with change in applied voltage with respect to time and if there is any mathematical relation for the same available.

Regards,
rc

The inductance is constant, unless the current through the inductor exceeds the saturation current of the inductor.
 
yes it was a typo, should have been applied current and not applied voltage.

1) But what will be effect in inductance in case of a piece of copper wire (considering hypothetically) whose radius changes when current flows through it ?

2) Also would like to know regarding the reply of berkeman ... what actually happens when applied current exceeds the saturation current of the inductor.Regards,
rc
 
Last edited:
rahul.6sept said:
2) Also would like to know regarding the reply of berkeman ... what actually happens when applied current exceeds the saturation current of the inductor.

The wikipedia page gives a pretty good explanation of saturation. Basically the inductance drops for currents that approach ane exceed Isat...

http://en.wikipedia.org/wiki/Saturation_(magnetic )

.
 
Last edited by a moderator:
It may be shown from the equations of electromagnetism, by James Clerk Maxwell in the 1860’s, that the speed of light in the vacuum of free space is related to electric permittivity (ϵ) and magnetic permeability (μ) by the equation: c=1/√( μ ϵ ) . This value is a constant for the vacuum of free space and is independent of the motion of the observer. It was this fact, in part, that led Albert Einstein to Special Relativity.
Thread 'Motional EMF in Faraday disc, co-rotating magnet axial mean flux'
So here is the motional EMF formula. Now I understand the standard Faraday paradox that an axis symmetric field source (like a speaker motor ring magnet) has a magnetic field that is frame invariant under rotation around axis of symmetry. The field is static whether you rotate the magnet or not. So far so good. What puzzles me is this , there is a term average magnetic flux or "azimuthal mean" , this term describes the average magnetic field through the area swept by the rotating Faraday...
Back
Top