Isothermal Compressibility always positive proof

AI Thread Summary
The discussion centers on the isothermal compressibility, represented as -(dV/dP)T,N, and its expected positivity at equilibrium. Participants explore the relationship between pressure and volume using the perfect gas law, demonstrating that isothermal elasticity is always positive under normal conditions. The conversation highlights the empirical basis for these thermodynamic relationships, acknowledging the existence of metastable states with negative pressure but affirming that true equilibrium requires positive compressibility. A detailed derivation is proposed to clarify the conditions under which these thermodynamic derivatives maintain their signs. The thread concludes with an invitation for further exploration of the derivation process.
skateboarding
Messages
11
Reaction score
0
I have a question on the quantity -(dV/dP)T,N where V = volume, P = pressure, T = temp, N = number of moles and T, N are held constant. I see in textbooks that this quantity is always positive at equilibrium. It makes intuitive sense, as if it were negative, it would be unphysical. I've been playing around with different maxwell relations, partial derivate relations, but can't seem to get to it. I know that Cv/T = (dS/dT)V,N where S = entropy is a positive quantity from the 2nd law. I should be able to relate this to my problem above. I have similar issues with -(dV/dP)S,N, (dN/du)S,N where u = chemical potential, (dN/du)T,V, which are all supposed to be positive. Thanks.
 
Last edited:
Science news on Phys.org
Hello and welcome skateboarding.

Try this elementary proof for a perfect gas, I have dropped the N as unneccessary.

Perfect Gas Law

PV = RT

Rearrange

P = RT{V^{ - 1}}

Partial Differentiate with respect to volume

{\left( {\frac{{\partial P}}{{\partial V}}} \right)_T} = - RT{V^{ - 2}} = \frac{{ - PV}}{{{V^2}}} = - \frac{P}{V}

Substitute into definition of isothermal elasticity (= 1/compressibility)

{K_T} = - V{\left( {\frac{{\partial P}}{{\partial V}}} \right)_T} = - V\left( { - \frac{P}{V}} \right) = P

So unless you can have negative pressure the isothermal elasticity, which is equal to the pressure, is always positive.

go well
 
Last edited:
Yes, this is true for ideal gases, and probably in general that the negative of the compressibility is positive. But this is based on empirical evidence of positive pressure. Of course there are meta stable systems with negative pressure, but not for true equilibrium. This seems good enough justification, but somewhat unsatisfying not being able to derive the results from first principles(laws of thermo). I guess what I'm really asking is why or how the derivate of a thermodynamic variable with respect to it's conjugate has a definite sign. T being the conjugate of S, V for P, N for u. If there is no other answer than it being so from empirical evidence, then I can deal with that, much in the same way that I see the laws of thermodynamics to be true.
 
Perhaps you might explain further?

In particular lay out where you want to start from and your objective, even if you can't fill in the intermediate steps.
 
I think I figured out the problem. Hopefully I didn't make any huge mistakes.

Consider an isolated volume partitioned by a moveable impermeable membrane.

\LARGE V_{total} = V_A + V_B

since total volume is constant

\LARGE (1) \hspace*{5mm} dV_A = -dV_B

We can write the total entropy of the system in terms of volume and energy, ignoring material exchange.

From the fundamental equation for entropy

\LARGE dS = \left(\frac{\partial S}{\partial U}\right)_VdU + \left(\frac{\partial S}{\partial V}\right)_UdV

And condition of equilibrium \LARGE dS = 0

\LARGE (2) \hspace{5mm} dS = \left(\frac{\partial S}{\partial V_A}\right)_UdV_A + \left(\frac{\partial S}{\partial V_B}\right)_UdV_B + \left(\frac{\partial S}{\partial U_A}\right)_VdU_A +\left(\frac{\partial S}{\partial U_B}\right)_VdU_B = 0

Since the system is isolated,

\LARGE dU_A = -dU_B \hspace*{10mm} and also, {\hspace*{10mm} \LARGE \frac{1}{T} = \left(\frac{\partial S}{\partial U}\right)_V

Plugging this into \LARGE (2) we get

\LARGE (3) \hspace{5mm}dS = \left(\frac{\partial S}{\partial V_A}\right)_UdV_A + \left(\frac{\partial S}{\partial V_B}\right)_UdV_B + \left(\frac{1}{T_A} - \frac{1}{T_B}\right)dU_A = 0

\LARGE T_A = T_B since we are only considering mechanical equilibrium

\LARGE (3) reduces to

\LARGE (4) \hspace{5mm}dS = \left(\frac{\partial S}{\partial V_A}\right)_UdV_A + \left(\frac{\partial S}{\partial V_B}\right)_UdV_B = 0

Now using the identity \hspace*{10mm} \LARGE \frac{p}{T} = \left(\frac{\partial S}{\partial V}\right)_U \hspace*{10mm} and \hspace*{5mm}(1)

\LARGE (5) \hspace{5mm} dS = \left(\frac{P_A - P_B}{T}\right)dV_A = 0

At equilibrium \LARGE P_A = P_B

We can write \LARGE (5) as

\LARGE (6) \hspace{5mm} \frac{dS}{dV_A} = \left(\frac{P_A - P_B}{T}\right)

Now for the tricky part

Suppose the system deviates from equilibrium slightly, and \LARGE P_A > P_B

From \LARGE (6) we see that the derivative is positive. Since always, \LARGE dS > 0 \hspace*{10mm} A must have a positive displacement \LARGE \Delta V_A > 0

At the same time, the condition for equilibrium dictates that \LARGE P_A will decrease on it's approach to equilibrium. \LARGE \Delta P_A < 0

Taking this all together,

\LARGE \frac{\Delta V}{\Delta P} < 0 \hspace*{10mm} and for an infitesimal change \hspace*{10mm} \LARGE \frac{dV}{dP} < 0

From this we see that

\LARGE -\left(\frac{\partial V}{\partial P}\right)_{T,N} > 0

Where the term N is the number of molecules, since we were looking at only mechanical equilibrium

There's probably a more elegant solution, but I think this works. This only assumes the first and 2nd laws of Thermodynamics. A similar argument for the conjugates S, T and N, u should get a similar answer.

Once the result is obtained for \LARGE -\left(\frac{\partial V}{\partial P}\right)_{T,N} a series of maxwell relations and Cp will lead you to the sign of\LARGE-\left(\frac{\partial V}{\partial P}\right)_{S,N}

I will post the derivation if anyone is interested.
 
I need to calculate the amount of water condensed from a DX cooling coil per hour given the size of the expansion coil (the total condensing surface area), the incoming air temperature, the amount of air flow from the fan, the BTU capacity of the compressor and the incoming air humidity. There are lots of condenser calculators around but they all need the air flow and incoming and outgoing humidity and then give a total volume of condensed water but I need more than that. The size of the...
I was watching a Khan Academy video on entropy called: Reconciling thermodynamic and state definitions of entropy. So in the video it says: Let's say I have a container. And in that container, I have gas particles and they're bouncing around like gas particles tend to do, creating some pressure on the container of a certain volume. And let's say I have n particles. Now, each of these particles could be in x different states. Now, if each of them can be in x different states, how many total...
Thread 'Why work is PdV and not (P+dP)dV in an isothermal process?'
Let's say we have a cylinder of volume V1 with a frictionless movable piston and some gas trapped inside with pressure P1 and temperature T1. On top of the piston lay some small pebbles that add weight and essentially create the pressure P1. Also the system is inside a reservoir of water that keeps its temperature constant at T1. The system is in equilibrium at V1, P1, T1. Now let's say i put another very small pebble on top of the piston (0,00001kg) and after some seconds the system...
Back
Top