Affordable Red Laser Beam: Tips and Recommendations for Straight Light

  • Thread starter Thread starter MythioS
  • Start date Start date
  • Tags Tags
    Laser Lighting
AI Thread Summary
Affordable options for obtaining a straight red laser beam are limited due to the technology constraints that prevent red lasers from visibly showing their beams in air. Unlike green lasers, which can be seen under certain conditions, red lasers require mist or fog to make the beam visible. While red laser pointers are still available and likely cheaper than before, they typically only display a dot at the end of the beam. For projects needing visible beams, using a fog machine can enhance visibility. Alternatives to traditional lasers that produce straight lines are also suggested, but specifics on those options remain unclear.
MythioS
Messages
50
Reaction score
0
Hope this is an apropriate thread to be asking this.. but I am curious if anyone knows a cheap way to get a straight red laser beam?

I found this green laser pen on the net and it has a fluid light from source to point but they say the red ones simply don't have the technology or something...

the smaller the laser generator or what not the better, which is why i ended up searching the pen ones.

Thanks
 
Engineering news on Phys.org
Just a few years ago all laser pointers were red. I would be surprised if you can't get them anymore. If anything, they should be cheaper.

Njorl
 
straight red laser beam

Its a good thing your looking for a straight red laser beam , those curved ones aren't cheep.
 
ive been seeing pen lights in red but they only show the dot at the end of the beam. I am looking for something that will show the beam itself.
 
Air does not effectively scatter red light, so no red laser will "show its beam" in air. You'd need to put some mist or dust or fog in the way to scatter the beam and make it visible.

Green laser light, on the other hand, is scattered by air -- though only slightly -- so you can see the beam. However, in an enclosure about the size of a room, there's not enough scattering to see the beam of a green laser either. You need about a kilometer of air and a dark night to be able to see a green laser's beam. They work great for pointing out stars to people, for example.

If this is for a science project or something on a table-top, the best way to make a laser's beam visible is simply to use one of those party-fog machines.

- Warren
 
Well it doesn't necessarily have to be an official laser. of there were a way to produce the same effect? I am not sure of a light that would emit such a straight line but perhaps someone else does
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top