Maximizing Plant Growth in Domes: A Critical Analysis of Arxiv Study

  • Thread starter Thread starter wolram
  • Start date Start date
  • Tags Tags
    Plants
AI Thread Summary
The discussion critiques the structural viability of dome designs proposed in the Arxiv study, particularly questioning the adequacy of a 0.3 mm thickness for large spans. Concerns are raised about the unspecified material properties of the film used in the dome construction. The feasibility of the three essential components mentioned in the study is also challenged, as they are not currently available. Despite skepticism, there is acknowledgment of the trend towards using tent-like materials in modern architecture, exemplified by Denver's airport. Overall, the practicality of the dome concept remains uncertain.
wolram
Gold Member
Dearly Missed
Messages
4,410
Reaction score
555
http://arxiv.org/ftp/arxiv/papers/0712/0712.3935.pdf

Scroll to page 14 or so to miss the general talk, i am asking about the viability of the dome, i am not sure the structure would be as robust as the paper states.
 
Engineering news on Phys.org
I didn't read through the whole thing, but the first thing I thought was that .3 mm thickness is pretty thin to be able to withstand just its own weight when stretched over large areas. They never say what material this film would be made from. I do get a kick out of reading papers that, essentially, say that we only need three things to get this to work. Those three things are not in existence or are even feasible. That being said, there are a lot of new buildings being made from tent like materials. Denver's airport being the first major one.
 
Hi all, I have a question. So from the derivation of the Isentropic process relationship PV^gamma = constant, there is a step dW = PdV, which can only be said for quasi-equilibrium (or reversible) processes. As such I believe PV^gamma = constant (and the family of equations) should not be applicable to just adiabatic processes? Ie, it should be applicable only for adiabatic + reversible = isentropic processes? However, I've seen couple of online notes/books, and...
Thread 'How can I find the cleanout for my building drain?'
I am a long distance truck driver, but I recently completed a plumbing program with Stratford Career Institute. In the chapter of my textbook Repairing DWV Systems, the author says that if there is a clog in the building drain, one can clear out the clog by using a snake augur or maybe some other type of tool into the cleanout for the building drain. The author said that the cleanout for the building drain is usually near the stack. I live in a duplex townhouse. Just out of curiosity, I...
I have an engine that uses a dry sump oiling system. The oil collection pan has three AN fittings to use for scavenging. Two of the fittings are approximately on the same level, the third is about 1/2 to 3/4 inch higher than the other two. The system ran for years with no problem using a three stage pump (one pressure and two scavenge stages). The two scavenge stages were connected at times to any two of the three AN fittings on the tank. Recently I tried an upgrade to a four stage pump...
Back
Top