Maxwell's Equations: Draw State of Polarization & Find B(x,t)

  • Thread starter Thread starter leoflindall
  • Start date Start date
  • Tags Tags
    Maxwell's equations
leoflindall
Messages
38
Reaction score
0

Homework Statement



Draw the state of polarization of the electromagnetic (EM) wave defined by

*****PLEASE NOTE EQUATION SHOWN IN NEXT POST****** (For some reason can't change it in this post...

with Eo real. Use a sentence to describe in words the state of polarization of this EM wave.

Use the differential form of Faraday's law to obtain B(x,t) for the same EM wave


Homework Equations



*****PLEASE NOTE EQUATION SHOWN IN NEXT POST****** (For some reason can't change it in this post...

The Attempt at a Solution



I have done the first part and found the EM wave to be circularly polarized (anticlockwise) with an amplitude of E0

i am unsure how to use faradays law. I tried breaking the LHS of faraday into its respective partial differential vector form, which i am currently working my way through but i am fairly sure it is wrong!

Any ideas on how to apply to get the magnetic field from the electric using faraday-maxwell's law would be greatly appreciated!

Many Thanks
 
Last edited:
Physics news on Phys.org
Sorry i copied and pasted the equation and it has come out wrong...

It should read

E(x,t) = Eo( y + e^(i3\Pi/2) z )e^(i(kx-\omegat)) ,


Bold Letters denote unit vectors

Relevant Equations;

\nabla x E = - \partialB / \partial t (Faraday-Maxwell Equation)

Excuse my mistake!
 
Last edited:
Your electric field is given by

<br /> \mathbf{E}=E(x,y,z,t)=E_0\exp[i(kx-\omega t)]\hat{\mathbf{y}}+E_0\exp[i(kx-\omega t)]\exp\left[i\frac{3\pi}{2}\right]\hat{\mathbf{z}}<br />

correct? But we also know \mathbf{E}=Re(\mathbf{E}&#039;\exp[i\omega t]) where \mathbf{E}&#039; is the spatial component of the electric field. Then through Faraday's law,

<br /> \mathbf{B}&#039;=-\frac{1}{i\omega}\nabla\times\mathbf{E}&#039;<br />

You can then solve \mathbf{B}=Re(\mathbf{B}&#039;\exp[i\omega t]).
 
Now that I've had a good night's rest, you can actually ignore the fact that I said the real components of the spatial electric and magnetic components. This would only be true if your original electric field were given by cosine.
 
Thank you, that really helps! I appreciate it!
 
##|\Psi|^2=\frac{1}{\sqrt{\pi b^2}}\exp(\frac{-(x-x_0)^2}{b^2}).## ##\braket{x}=\frac{1}{\sqrt{\pi b^2}}\int_{-\infty}^{\infty}dx\,x\exp(-\frac{(x-x_0)^2}{b^2}).## ##y=x-x_0 \quad x=y+x_0 \quad dy=dx.## The boundaries remain infinite, I believe. ##\frac{1}{\sqrt{\pi b^2}}\int_{-\infty}^{\infty}dy(y+x_0)\exp(\frac{-y^2}{b^2}).## ##\frac{2}{\sqrt{\pi b^2}}\int_0^{\infty}dy\,y\exp(\frac{-y^2}{b^2})+\frac{2x_0}{\sqrt{\pi b^2}}\int_0^{\infty}dy\,\exp(-\frac{y^2}{b^2}).## I then resolved the two...
Hello everyone, I’m considering a point charge q that oscillates harmonically about the origin along the z-axis, e.g. $$z_{q}(t)= A\sin(wt)$$ In a strongly simplified / quasi-instantaneous approximation I ignore retardation and take the electric field at the position ##r=(x,y,z)## simply to be the “Coulomb field at the charge’s instantaneous position”: $$E(r,t)=\frac{q}{4\pi\varepsilon_{0}}\frac{r-r_{q}(t)}{||r-r_{q}(t)||^{3}}$$ with $$r_{q}(t)=(0,0,z_{q}(t))$$ (I’m aware this isn’t...
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
Back
Top