Mechanical Final Year Project Ideas

AI Thread Summary
The discussion revolves around seeking mechanical final year project ideas focused on renewable energy sources like wind and solar. The original poster expresses a preference for projects with ample online resources available for research. A participant highlights that energy projects often incorporate electrical engineering concepts. The original poster later confirms they have already selected a project and are currently working on it. The conversation emphasizes the importance of accessible information for successful project completion.
engineer46
Messages
14
Reaction score
0
Hi,

what do you suggest me? I prefer something relevant to energies (wind, solar etc) and to be something who i can found many info on the web to help me with my project.
 
Engineering news on Phys.org
can anyone please give me his lights?
 
engineer46 said:
Hi,

what do you suggest me? I prefer something relevant to energies (wind, solar etc) and to be something who i can found many info on the web to help me with my project.

Welcome to the PF. Energy projects will involve EE concepts. Are you okay with that?
 
thank you for the welcome. i have already found my project and i am in the middle of it :) thank you anyway. i sent you a pm
 

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »
Thread 'What's the most likely cause for this carbon seal crack?'

Thread 'What's the most likely cause for this carbon seal crack?'

We have a molded carbon graphite seal that is used in an inline axial piston, variable displacement hydraulic pump. One of our customers reported that, when using the “A” parts in the past, they only needed to replace them due to normal wear. However, after switching to our parts, the replacement cycle seems to be much shorter due to “broken” or “cracked” failures. This issue was identified after hydraulic fluid leakage was observed. According to their records, the same problem has occurred...
View full post »

Similar threads

Mechanical Engineering projects
Replies
2
Views
1K
Mechanical/Aerospace Engineering Undergrad Senior Design Project
Replies
3
Views
2K
Mechanical guy needs help with endothermic reaction and heat decomposition
Replies
8
Views
1K
Final year raytracer project ideas
Replies
3
Views
2K
Final project ideas using Noether's theorem in simulation class
Replies
4
Views
1K
Creative Engineering Projects: Inspiring Ideas for Final Year Projects
Replies
2
Views
2K
Ideas for a research project for my Aerospace dissertation?
Replies
1
Views
2K
What are some good ideas for capstone project?
Replies
2
Views
2K
Is a Larger DC Motor Needed for Low Wind Speed Power Generation?
Replies
34
Views
4K
Final year project on archemedes screw
Replies
3
Views
2K

Hot Threads

Recent Insights

Back
Top