Mutual inductance and magnetic feild

2 replies · 2K views · last reply
abdullah khaled
Messages
6
Reaction score
0
hi,
in this problem here
Circuit schematic with a current source ig, resistors 5 Ω, 20 Ω and 60 Ω, inductors 4 H, 8 H (mutual) and 16 H, and mesh currents i1, i2 and ig marked.

66meM1E

there's 2 perpendicular coils but in solution there's an effect of mutual inductance
Worked solution showing two mesh voltage equations: for the i1 mesh, 4 di1/dt + 8 d(ig - i2)/dt + 20(i1 - i2) + 5(i1 - ig) = 0; for the i2 mesh, 20(i2 - i1) + 60 i2 + 16 d(i2 - ig)/dt - 8 di1/dt = 0. Red underlines mark the mutual inductance terms.

MLSofTG

why?
 
Attachments
  • Circuit schematic with a current source ig, resistors 5 Ω, 20 Ω and 60 Ω, inductors 4 H, 8 H (mutual) and 16 H, and mesh currents i1, i2 and ig marked.
    66meM1E.png
    4.6 KB · Views: 1,328
  • Worked solution showing two mesh voltage equations: for the i1 mesh, 4 di1/dt + 8 d(ig - i2)/dt + 20(i1 - i2) + 5(i1 - ig) = 0; for the i2 mesh, 20(i2 - i1) + 60 i2 + 16 d(i2 - ig)/dt - 8 di1/dt = 0. Red underlines mark the mutual inductance terms.
    MLSofTG.png
    8 KB · Views: 1,066
The effect of inductor A on inductor B is to induce a emf in B and is due to the time rate of change of the current that is flowing in A and the mutual inductance..
i.e. emfB = - MABdIa/dt
 
Apparently the schematic diagram does not represent the physical layout of the inductors. It's misleading in that respect.
 
  • Like
Likes   Reactions: abdullah khaled