Online ME Masters Degree: Balancing Work and Education - Advice Needed"

  • Thread starter Thread starter cstoos
  • Start date Start date
  • Tags Tags
    Degrees Graduate
AI Thread Summary
Pursuing an online ME Master's degree while working full-time is feasible, despite challenges like lab access and software requirements. Many universities now offer flexible online options and satellite classes, which can accommodate working students. Face-to-face meetings with advisors may still be necessary, potentially requiring travel. The distance to the chosen school can complicate logistics, especially if it's significantly far away. Overall, careful planning and communication with the institution can help manage the balance between work and education effectively.
cstoos
Messages
61
Reaction score
0
I have been looking at getting my ME Masters degree, but I am currently working full time and will definitely not be taking time off to pursue it (meaning, I want to accomplish it while working).

My only local option doesn't really offer night classes for engineering graduate degrees so that leaves online as my only real option. There is info online about which schools offer online degrees, but I don't know anybody who has done this as an ME. Anybody have any experience/advice on the matter?
 
Engineering news on Phys.org
I actually just completed my masters through a distance program. Many schools now support satellite classes. There were even classes that weren't initially setup to be online that were then modified at my request. Most of the courses I took were through a satellite connection where I connected in from a local community college, and one of them was delivered online, which I simply watched from home. The hardest part was performing the research, which really required face to face meetings with my advisor. I ended up making a 2 hr drive to the school every other week.

Send me a pm if you have any specific questions.
 
Thanks for the reply. That is pretty much the type of information I am looking for. I have been worrying about things like labs associated with classes, necessary software programs that I won't have computer lab access to, etc.

A two hour drive every few weeks wouldn't be too bad, but the school I have been leaning towards is about a 20 hour drive from my location. I think that added distance would complicate things even more, which stinks because UW-Madison has a highly rated online degree program with emphasis in my field (IC engines).
 
Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly

Similar threads

Replies
6
Views
2K
Replies
80
Views
3K
Replies
7
Views
2K
Replies
49
Views
6K
Replies
11
Views
3K
Replies
20
Views
2K
Back
Top