Optical Fiber Transfer Function (attenuation and dispersion)

AI Thread Summary
The discussion focuses on the transfer function of single mode fiber (SMF) and the user's inquiry about the equation used to simulate the optical field's behavior over distance. They seek clarification on why attenuation, represented by alpha, is divided by two in the equation. Additionally, they are looking for the relationship between two equations related to pulse evolution through SMF. The user also expresses frustration with formatting issues when attempting to use LaTeX for equations in their posts. Forum administrators have acknowledged a recent server upgrade that has caused LaTeX functionality to break, and users are advised to check for updates on the issue.
Oziyak
Messages
3
Reaction score
0
I have a few questions regarding the transfer function of a SMF. I'm using the below equation to simulate the effect a single mode fiber (SMF) has on the optical field after some distance \textit{z}.
\begin{equation}<br /> S_{out}(\omega) = S_{in}(\omega)\exp\left<br /> [z\left(-\frac{\alpha}{2}-i\frac{\beta_{2}}{2}(\Delta\omega)^{2}-i\frac{\beta_{3}}{6}(\Delta\omega)^{3}\right)<br /> \right ]<br /> \end{equation}<br /> <br /> My question is in regards to the origin of this equation. I understand the inclusion of the $\beta$ terms, and realize that $\alpha$ represents the attenuation, but why is it alpha divided by 2?<br /> <br /> When I look in a textbook I have they say the following equation dictates pulse evolution through a SMF:<br /> <br /> \begin{equation}<br /> \frac{\partial A}{\partial z}+ \frac{i\beta_{2}}{2}\frac{\partial ^{2}A}{\partial<br /> t^{2}}- \frac{\beta_{3}}{6}\frac{\partial ^{3}A}{\partial<br /> t^{3}} = 0<br /> \end{equation}<br />

I suppose I'm looking for the relationship between equations (1) and (2) of this post as well. In equation (2) A is the slowly varying amplitude (or envelope) of the pulse.

Thank you very much for reading, and also for any assistance you can provide. If you require anymore detail from me or if I have missed something please let me know.
 
Engineering news on Phys.org
I've been trying to reply to my own post for those who are interested... but everytime I try to use more TEX coding for equations it never displays it properly in the preview, so I'm assuming it wouldn't in the post either... can an admin help me with this?

everytime I use a tex tag it just puts beta in it?
 
Oziyak said:
I've been trying to reply to my own post for those who are interested... but everytime I try to use more TEX coding for equations it never displays it properly in the preview, so I'm assuming it wouldn't in the post either... can an admin help me with this?

everytime I use a tex tag it just puts beta in it?

The admins just did a server upgrade over the weekend, and Latex is one of the things that got broken. Check out the Forum Feedback and Announcements forum to see what the progress of the fix is.
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top