Phasors & AC-Current: Same Direction?

  • Thread starter Thread starter Niles
  • Start date Start date
  • Tags Tags
    Phasors
AI Thread Summary
The discussion centers on the relationship between two AC currents with a phase difference of π radians. Despite one current flowing from A to B and the other from B to A, the phase difference indicates that they are effectively opposite at any given moment. However, when considering the direction of flow, the currents align over time due to their definitions. The graphical representation confirms that the currents will appear to move in the same direction when viewed over time. Overall, the currents do go the same way despite their initial opposing definitions.
Niles
Messages
1,834
Reaction score
0
Hi all.

If I have a current going from A to B with a phase of 0.78 (radians) at time t, and a current going from B to A with a phase of 0.78+Pi = 3.93 at the same time t, does this mean that the currents are going the same way?

Thanks in advance.


Niles.
 
Engineering news on Phys.org
all that's really crucial is that their phase difference is pi, so their graphs over time will look like this:

http://www.4815162342.org.uk/e014b2.gif
(note, if you wanted it to perfectly match your situation, you could move the x-y axes over a pinch, but it would be the same result.)From the graphic it appears the two currents are always pointing opposite directions, however your problem states that one current is "from A to B" and the other is "from B to A" so one of them will be flipped and line up with the other one. So they do go the same direction over time.
 
Last edited by a moderator:
Thanks for taking the time to plot the graphics and for answering.

Have a happy New Year.
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top