Physics Question about Diffraction Gradings

AI Thread Summary
The highest order of interference maximum for monochromatic light with a wavelength of 560 nm illuminating a diffraction grating with 4000 lines/cm can be calculated using the formula d/λ. The distance between slits, calculated as 2.5 x 10^-6 meters, is derived from the grating's specifications. The attempt to find the maximum order using I=mλ/d led to an incorrect result, indicating a possible error in the calculations. To determine the maximum number of orders, the value of d/λ must be rounded down to the nearest whole number. Clarification on this calculation process is sought to identify any mistakes made.
tnbstudent
Messages
11
Reaction score
0
Question:
What is the highest order of interference maximum that can occur when monochromatic light with a wavelength of 560 nm illuminates a diffraction grating with 4000 lines/cm?

Attempt:
I thought this seemed really easy, but my answer was incorrect.
λ=560nm
Since there are 4000 lines per centimeter - I solved for the distance between two slits to be 2.5*10^-6 meters.
Using I=mλ/d and m=1 to to achieve the max I got 0.224 but that was incorrect

I think I've made a silly error but I'm not sure what it is - can someone point me in a direction
 
Science news on Phys.org
The max number of orders is d/λ which must be rounded down if it is not a whole number
 
Thank you!
 
I would like to use a pentaprism with some amount of magnification. The pentaprism will be used to reflect a real image at 90 degrees angle but I also want the reflected image to appear larger. The distance between the prism and the real image is about 70cm. The pentaprism has two reflecting sides (surfaces) with mirrored coating and two refracting sides. I understand that one of the four sides needs to be curved (spherical curvature) to achieve the magnification effect. But which of the...

Similar threads

Replies
3
Views
925
Replies
6
Views
7K
Replies
3
Views
850
Replies
9
Views
2K
Replies
1
Views
5K
Replies
2
Views
3K
Back
Top