Physics Relativity/Power Question?

  • Thread starter Thread starter justinh8
  • Start date Start date
  • Tags Tags
    Physics
AI Thread Summary
To determine the number of fusion reactions needed to generate 3 x 10^3 MW of thermal power, the calculation involves dividing the power output (3.0 x 10^9 J/s) by the energy produced per reaction (2.808 x 10^-12 J). This results in approximately 1.0683 x 10^21 reactions per second. The calculation confirms that the units are consistent, yielding reactions per second as the final result. The discussion emphasizes the importance of expressing answers clearly in relation to the question asked. The conclusion is that the calculations and units used are correct.
justinh8
Messages
43
Reaction score
0
Physics Relativity/Power Question??

Homework Statement


When a fusion power reactor is possibly created, it is expected to produce about 3 x 10^3 MW of termal power. If a fusion reaction produces 2.808 x 10^-12 Joules, how many fusion reactions must occur per second to generate this power?




The Attempt at a Solution


What i did was 3 x 10^9 J/s / 2.808 x 10^-12 J. But my problem is that if i do that i will only get seconds and not reaction per seconds. Please help.
 
Physics news on Phys.org


justinh8 said:

Homework Statement


When a fusion power reactor is possibly created, it is expected to produce about 3 x 10^3 MW of termal power. If a fusion reaction produces 2.808 x 10^-12 Joules, how many fusion reactions must occur per second to generate this power?




The Attempt at a Solution


What i did was 3 x 10^9 J/s / 2.808 x 10^-12 J. But my problem is that if i do that i will only get seconds and not reaction per seconds. Please help.

The key to the question is in red above. So presumably the answer will have units s-1.

When you do your calculations, looking an the units, it is (Js-1) divide (J) which gives s-1, which seems like a good start.

By the way, the "reactions" in "reactions per second" is a count, so has no dimensions.
 


Ok, can you tell me if this is correct: N = the number of reactions and Eo = 2.808x10^-12J
P = 3.0 × 10 ⁹ W = 3.0 × 10 ⁹ J / s
P = E / t --> E = P t
E = N E₀ --> N = E / E₀
N = P t / E₀ … --> … N / t = P / E₀ = [ 3.0 × 10 ⁹ J / s ] / [ 2.808 × 10 ^⁻ 12 J ]
N / t = 1.0683 × 10 ^21 / s
Is this correct?
 


justinh8 said:
Ok, can you tell me if this is correct: N = the number of reactions and Eo = 2.808x10^-12J
P = 3.0 × 10 ⁹ W = 3.0 × 10 ⁹ J / s
P = E / t --> E = P t
E = N E₀ --> N = E / E₀
N = P t / E₀ … --> … N / t = P / E₀ = [ 3.0 × 10 ⁹ J / s ] / [ 2.808 × 10 ^⁻ 12 J ]
N / t = 1.0683 × 10 ^21 / s
Is this correct?

it looks to be about the right size.

EDIT: Though you were not asked for the value of N/t, you were asked "how many fusion reactions per second, so a better answer would be

There would be 1.0683 × 10 ^21 fusion reactions per second.

If a question is asked in words, it should be answered in words.
If the question was "what is the number of fusion reactions per second, then you would give just the number.
 


Did i do it correctly in terms of the units? So basically isn't it just 3.0 × 10 ⁹ J / s / 2.808 × 10 ^⁻ 12 J?
 


justinh8 said:
Did i do it correctly in terms of the units? So basically isn't it just 3.0 × 10 ⁹ J / s / 2.808 × 10 ^⁻ 12 J?

Yes.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top