Power & Force: Solving a Cyclist's Problem

  • Thread starter Thread starter 7tongc5
  • Start date Start date
  • Tags Tags
    Force Power
AI Thread Summary
The discussion centers on understanding the relationship between power and force in the context of a cyclist's performance. A cyclist is moving at 8 m/s with a power output of 500W, and the main inquiry is about calculating the force exerted on the pedals. Clarification is provided that the force required to propel the bike forward may differ from the force applied to the pedals. The conversation emphasizes the importance of distinguishing between these two forces when solving the problem. Understanding this distinction is crucial for accurately applying physics concepts to real-world scenarios.
7tongc5
Messages
9
Reaction score
0
Hi
just took my physics test today and it turns out that the 2 problems i couldn't get both happened to test my understanding of the relation between power and force. I don't have numbers but i'd like to get a better understanding of that concept so.. here's the gist of it:

There's a cyclist moving at 8 m/s w/ 500W. Find the force used to push down the pedal.

something like that. Any little hint would be appreciated! Thanks
 
Physics news on Phys.org
7tongc5 said:
Find the force used to push down the pedal.
something like that.

Are you sure that the problem asked for the force used to push down the pedal? The reason I ask is that the given information is sufficient to tell you the force with which the bike is propelled forward, but that is not necessarily the same as the force applied to the pedal.
 
if not the force applied to the pedal, then it's probably the force that propels the bike forward.

*I don't remember the exact wording, but i;m sure of the info that was given.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top