Questions for a Robotic Engineer

  • Thread starter Thread starter Scott_Lemon
  • Start date Start date
  • Tags Tags
    Engineer
AI Thread Summary
Becoming a robotic engineer typically requires a blend of education in mechanical, electrical, and computer engineering, with programs like Mechatronics Engineering being relevant. Key skills include proficiency in electronics, programming, and systems design. Career opportunities are notably strong in countries like Japan, the U.S., and Germany, where the field is advancing rapidly. Average annual incomes for robotic engineers are around $100,000, with starting salaries around $70,000 and potential earnings exceeding $120,000 for experts. The field has evolved significantly, becoming more technologically advanced over time.
Scott_Lemon
Messages
1
Reaction score
0
I am looking for some information about becoming a robotic engineer, but all the people I have contacted have been too busy or not replied. This includes other forums. So could some people answer the questions below. It does not matter if all of them are not answer but in the end I am hoping to have them all answered.

Questions

1. What is your name? (Real please just so that others do not think I made up the results to these questions)

1. What is your current position involving robots? e.g. Head of a robotics team. (This is so I know who the information is coming from)

2. How long have you been working with robots?

3. What does the job currently involve?

4. Do you enjoy working in your current position with robots? Why/Why not?

5. Since you have been working with robots how has the job changed? e.g. More technologically advanced.

6. What did the job use to involve (before it changed)?

7. What education is required to end up working with robots?

8. What courses of study would need to be taken to end up working with robots?

9. Are there any specific skills needed to work with robots? If there are then what are they?

10. What career prospects are available for a robotic engineer?

11. Where globally would career opportunities as a robotic engineer be found? ie Are some countries more focused on robotic engineering than others?

12. What would be the average annual income of a person involved with robots?

A very large thanks to anyone who answers any of these questions.
Scott Lemon
 
Engineering news on Phys.org
I'm no expert on this subject, but I believe that the Nipponese are the best robot designers. Perhaps you should take a trip to Tokyo?
 
I am nowhere close to being an engineer, but I am just starting an undergrad program known as "Mechatronics Engineering" at the University of Waterloo, Canada. It's a blend of Mechanical, Computer, Systems and Electrical programs...pretty much "Robotics Engineering". As well, I recall Carnegie Mellon U in the States having a Robotics Ph.D program...perhaps one of these would provide a direction for you to follow...
 
7. What education is required to end up working with robots?

robotics is about 30% electronic engineering, 30% mechanical engineering, 30% computer science/engineering, and 10% various disciplines including language technology, designing, and others.

11. Where globally would career opportunities as a robotic engineer be found? ie Are some countries more focused on robotic engineering than others?

Japan, U.S., and Germany

12. What would be the average annual income of a person involved with robots?

average: 100k
starting income is usually around 70k
if you become an expert in the field, you can easily get 120k
 
btw I'm studying robotics at Carnegie Mellon university.
 
I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Calculate minimum RPM to self-balance a CMG on two legs'
Here is a photo of a rough drawing of my apparatus that I have built many times and works. I would like to have a formula to give me the RPM necessary for the gyroscope to balance itself on the two legs (screws). I asked Claude to give me a formula and it gave me the following: Let me calculate the required RPM foreffective stabilization. I'll use the principles of gyroscopicprecession and the moment of inertia. First, let's calculate the keyparameters: 1. Moment of inertia of...
Back
Top