Reactive Power: A Strange Concept?

AI Thread Summary
The discussion critiques an article on reactive power, with one participant expressing that it offers no new insights, deeming it sophomoric and poorly reasoned. The concept of reactive power is debated, with some arguing it is an oxymoron and suggesting the term "power factor" is more appropriate. Utility operators are highlighted as the primary stakeholders concerned with reactive power, as it affects their operational efficiency and costs. Additionally, large electrical users are noted for their investment in systems to correct low power factors. The conversation emphasizes the ongoing relevance of the term "reactive power" in education and industry.
Eero
Messages
10
Reaction score
0
Hi!

What is your opinion about this article:

"www.bme.hu/ptee2000/papers/fetea.pdf"[/URL]
 
Last edited by a moderator:
Engineering news on Phys.org
Much ado about nothing. Everything he covered, I already learned in my sophomore year of college, majoring in EE. Seriously, very seldom do I read a paper and not get something out of it. I've been practicing EE for 32 yrs, and I'm less than a year away from my doctorate. Yet, I always learn something new, albeit just a small amount, when reading a paper like this one.

This paper, however, taught me absolutely nothing I didn't already know. In a nutshell, this paper is sophomoric claptrap, building and reducing straw men.

In general, anytime somebody claims that the status quo belief/teaching on a particular topic is "myth, misconception, etc.", and here is the "real" answer, 9 times out of 10, or actually 99 times out of 100, they are not as smart as they think they are. Also, their "answer" is usually just a trivial and narrow interpretation of narrowly selected laws, or the "misconceptions" they refute are just straw men. These people are not as smart as they believe. Also, those whom they refute are not as incapable as they believe.

I just lost 10 minutes of my life reading and critiquing what basically is a worthless article. This paper belongs in circular file no. 13. What a piece of rubbish.

Claude
 
Last edited:
I am on the same frequency as you !
 
Reactive power is an oxymoron, Where's the power? Use the term "power factor" instead. The only people who really care are the public utility power station operators, who see the extra current in their alternator stator windings because the power factor has not been corrected at the load.
Bob S
[added] The public utility has to provide a fixed amount of real power (kilowatts) to the user. If the user's power factor is low (meaning higher kVA), the utility has to provide more current to the user, which means more amps in the alternator, switch gear, and transmission lines, ultimately meaning more power loss and more water over the dam. So maybe reactive power is not an oxymoron in some cicumstances.
RS
 
Last edited:
Bob S said:
Reactive power is an oxymoron, Where's the power? Use the term "power factor" instead. The only people who really care are the public utility power station operators, who see the extra current in their alternator stator windings because the power factor has not been corrected at the load.
Bob S
Note that students will continue to see the term 'reactive power' though.

Also the large electrical users care about low power factors, as they invest in the corrective systems and pay the utilities for low power factor usage.
 
Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
Thread 'Electromagnet magnetic field issue'
Hi Guys We are a bunch a mechanical engineers trying to build a simple electromagnet. Our design is based on a very similar magnet. However, our version is about 10 times less magnetic and we are wondering why. Our coil has exactly same length, same number of layers and turns. What is possibly wrong? PIN and bracket are made of iron and are in electrical contact, exactly like the reference design. Any help will be appreciated. Thanks. edit: even same wire diameter and coil was wounded by a...
Back
Top