Rectifiers and electrical networks

AI Thread Summary
The discussion focuses on the impact of rectifiers on maintaining a sinusoidal voltage curve in electrical networks, particularly in wind farms. It highlights that while wind turbines do not produce a perfect waveform due to varying speeds, the use of rectifiers and inverters allows for the generation of a clean AC sine wave. The output from multiple turbines, regardless of their individual power ratings, can be combined and processed to achieve this desired waveform. The effectiveness of the inverter is crucial, as it is designed to produce a near-perfect sinusoidal output. Overall, rectification and inversion processes ensure that the final output meets the necessary standards for power distribution.
barendfaber
Messages
53
Reaction score
0
Hi,

I have read on Wikipedia (http://en.wikipedia.org/wiki/Rectifier, under Rectifier output smoothing) "In extreme cases where many rectifiers are loaded onto a power distribution circuit, it may prove difficult for the power distribution authority to maintain a correctly shaped sinusoidal voltage curve.".

Does anyone know how many rectifiers you can add to an electric network while still maintaining a correctly shaped sinusoidal voltage curve? If I look at a wind farm, not all the turbines will spin at the same speed at the same time. How do they manage to put out a perfect curve?
 
Physics news on Phys.org
barendfaber said:
Does anyone know how many rectifiers you can add to an electric network while still maintaining a correctly shaped sinusoidal voltage curve?

When a large part of the power through the network leaves through the rectifiers. A more precise answer depends on your exact needs.


barendfaber said:
If I look at a wind farm, not all the turbines will spin at the same speed at the same time. How do they manage to put out a perfect curve?

They don't, but it doesn't matter what waveform they put out, because you're rectifying it. You're only interested in the output of the rectifier in that case, you're not using the input to power anything else. The rectified DC from all the turbines is added, filtered, and used to power an inverter that gives clean AC sine waves of the proper phases. You don't just plug a wind turbine into the grid.
 
Every single wind turbine of significant size has an inverter. This has been the case for decades... too short for books and teachers to know it.

So: wind turbines produce AC power with the most perfect form.
 
Awesome! Thanks for the help. Not everything you read on the internet always makes sense! So regardless of the waveform, once rectified and put through an inverter, you will always get a perfect sinusoidal wave form? One last question, can you combine a 2.5 kW, 5 kW and 7.5 kW turbine to the same network, and once rectified and put through and inverter, you will still get the perfect wave?
 
barendfaber said:
Awesome! Thanks for the help. Not everything you read on the internet always makes sense! So regardless of the waveform, once rectified and put through an inverter, you will always get a perfect sinusoidal wave form? One last question, can you combine a 2.5 kW, 5 kW and 7.5 kW turbine to the same network, and once rectified and put through and inverter, you will still get the perfect wave?

The purpose of such an inverter is to provide as close to such a waveform as is practical...you're basically asking if it will operate as designed. Hopefully the answer is yes, you've got a problem if it isn't.
 
Thanks, question answered!
 
This is from Griffiths' Electrodynamics, 3rd edition, page 352. I am trying to calculate the divergence of the Maxwell stress tensor. The tensor is given as ##T_{ij} =\epsilon_0 (E_iE_j-\frac 1 2 \delta_{ij} E^2)+\frac 1 {\mu_0}(B_iB_j-\frac 1 2 \delta_{ij} B^2)##. To make things easier, I just want to focus on the part with the electrical field, i.e. I want to find the divergence of ##E_{ij}=E_iE_j-\frac 1 2 \delta_{ij}E^2##. In matrix form, this tensor should look like this...
Thread 'Applying the Gauss (1835) formula for force between 2 parallel DC currents'
Please can anyone either:- (1) point me to a derivation of the perpendicular force (Fy) between two very long parallel wires carrying steady currents utilising the formula of Gauss for the force F along the line r between 2 charges? Or alternatively (2) point out where I have gone wrong in my method? I am having problems with calculating the direction and magnitude of the force as expected from modern (Biot-Savart-Maxwell-Lorentz) formula. Here is my method and results so far:- This...

Similar threads

Back
Top