Revolutionizing Air Travel: The Future of Batwing Airplanes

  • Thread starter Thread starter Skyhunter
  • Start date Start date
  • Tags Tags
    Airplanes
AI Thread Summary
Future air travel may see the introduction of batwing aircraft as a solution to climate change, potentially eliminating window seats for passengers. This concept, rooted in historical designs from the 1950s and 60s, raises skepticism regarding the feasibility of proposed materials and technologies, such as boundary layer control systems. Critics argue that the idea combines outdated concepts without addressing fundamental stability issues that have historically plagued flying wings. Despite these challenges, proponents believe that advancements in fly-by-wire technology could make batwing designs viable for commercial use, offering significant fuel savings. The discussion highlights the need for innovative solutions in aviation while acknowledging the historical context of flying wing designs.
Skyhunter
This is interesting. I would like to hear comments from the engineers in this forum.

AIRLINE passengers of the future will have to do without window seats and fly in giant “batwing” aircraft as a result of aviation industry proposals to tackle climate change

http://www.timesonline.co.uk/article/0,,2-1853992,00.html
 
Engineering news on Phys.org
They had so many plans for Jack Northrops flying wing back in the '50s and '60s. This idea is nothing new. The notion that the contrails are enough to help trap heat is a dubious statement at best.

I also don't know of a single plastic today that can be used in the fashion they are stating. I would think today's technology is limited to composites. Even with them, not all of the aircraft is usually composite material although some are coming very close to that.

They also mention boundary layer control via the vacuum system approach. That too has been around for a very long time.

Personally, I think we need new ideas and such, but this story seems to take all of the ideas from the past 40 years and put them together in a happy feel good notion of what we should do. It'd be great if it can be done.

http://www.warbirdforum.com/paxwing.htm
 
Last edited:
that concept goes back to World War 2. Jack Northop and the German engineers both had designs of it in the works but both of them weren't fast enough to get developed before the wars end, and after that funding was stopped.
 
Absolutely awful article. Environazi drivel. As the others stated, the flying wing is Northrop's idea - I've never heard of Frederick Handley Page. And climate change? Whaaa? Saving 20% on fuel is a beautiful thing, for sure, but climate change wasn't even in the back of people's minds when Northrop first proposed the idea. It's all about lift/drag ratio.

Flying wings will certanly happen. And they are viable now, if Boeing and Airbus choose to spend the little extra in development costs required. The reason for them to be viable as airliners is pure and simple economics: they are cheaper to fly than conventional designs.
 
Last edited:
Ki Man said:
that concept goes back to World War 2. Jack Northop and the German engineers both had designs of it in the works but both of them weren't fast enough to get developed before the wars end, and after that funding was stopped.
Well, the problem wasn't time and funding, it was stability. Flying wings are inherrently unstable in pitch and yaw, and because of that, they simply didn't work at the time. That problem is only solvable (but easily solvable) with fly-by-wire. The B-2 was an inevitability, but Jack Northrop was ahead of his time.
 
yea, the first flying wing aircraft flipped over and crashed because it didn't have the computers and control systems we do today

after the war jack stopped getting funded by the gov. but kept going with his own money. but after the accident he "gave up"

truly revolutionary thinker. he also made giant leaps in the vertical take off aircraft too
 
Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...

Similar threads

Back
Top