Running Speed Calculation for 62.5 kg Runner - 65.4 W Race

  • Thread starter Thread starter nazarip
  • Start date Start date
AI Thread Summary
A 62.5 kg runner dissipates 0.554 J of mechanical energy per step, leading to a total energy loss of 34.6 J for every 1.5 m run. With a power output of 65.4 W, equivalent to 65.4 J/s, the relationship between energy dissipation and running speed can be established. By calculating the number of steps taken in a unit of time and multiplying by the step length of 1.5 m, the runner's speed can be determined. The approach outlined effectively connects energy dissipation to running speed. This method provides a clear path to calculating the runner's velocity based on the given parameters.
nazarip
Messages
16
Reaction score
0
While running, a person dissipates about 0.554 J of mechanical energy per step per kilogram of body mass. If a 62.5 kg runner dissipates a power of 65.4 W during a race, how fast is the person running? Assume a running step is 1.50 m in length.

Well I know that the person loses 34.6 J of mech energy every 1.5 m and loses a total of 65.4 watts during the entire race. Now 65.4 W is just 65.4 J/s, so how can I further relate all of these givens? I am a little confused. Thanks for any help in advance.
 
Physics news on Phys.org
In one step, the amount of energy dissipated is given by

(62.5kg)(0.554Jkg^{-1}) (per step or per 1.50m)

Suppose there are n steps. This corresponds to a distance 1.50n meters. Hence in n steps the energy dissipated per unit time is

(62.5)(0.554)(n) = 65.4

from this you can get the number of steps he covers in unit time. Multiply it by 1.50m to get the speed. Is this okay?

cheers
vivek
 
Thanks for the help.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top