Ruthenium Battery Prototype: A Breakthrough or a Secret?

  • Thread starter Thread starter BatteryNut
  • Start date Start date
  • Tags Tags
    Battery Prototype
AI Thread Summary
Researchers at the University of Tokyo have developed a ruthenium-based battery prototype that reportedly outperforms lithium-ion batteries, retaining nearly 96% of its charge over months. The prototype, comparable in size to a standard laptop battery, successfully powered an electric car motor for hours without overheating, unlike traditional lithium-ion systems. Despite its promising capabilities, there is limited information available, raising questions about why the technology remains under wraps. Concerns about the rarity and cost of ruthenium, priced around $300 per troy ounce, may hinder mass production. The battery functions as a metal-hydride system rather than a fuel cell, suggesting potential for further development.
BatteryNut
Messages
1
Reaction score
0
Ruthenium and its ability to absorb hydrogen somehow was made into a battery prototype by some researchers at the University of Tokyo. It was demonstrated to hold a charge better than lithium ion batteries with nearly 96% retention of the incoming charge over a period they claimed reached months. The size of the prototype was equal to that of a standard laptop battery, yet in a small battery bank series powered an electric car motor at full speed for hours. I thought this would have been world news by now, yet there is silence.

Does anyone have more info? Can somebody out there get some more info out of Tokyo if you have access to this technology? Why is it being kept "under wraps"? It did not seem to overheat as the lithium ion storage method does. What would be difficult about producing more than a prototype of a ruthenium based battery?
 
Engineering news on Phys.org
What would be difficult about producing more than a prototype of a ruthenium based battery? Cost probably, ruthenium is rare and very useful for many things.

"It was demonstrated to hold a charge better than lithium ion batteries ..." What about energy density?

"its ability to absorb hydrogen somehow" Is it a fuel cell?

Why is it being kept "under wraps"? I doubt that it is.

"a small battery bank series powered an electric car motor at full speed for hours."

With what sort of load?

I'm having some trouble finding a good hit about this (search engines keep giving this page 1st), but I did get you the price of ruthenium, ~ $300 per troy ounce.
 
Last edited:
Also, you should note the word 'series.'
That means it's more than just a lab-top battery sized object powering this motor.
 
"its ability to absorb hydrogen somehow" Is it a fuel cell?
It's not a fuel cell, but a metal-hydride battery, as in Li-metal hydride.

I'm sure the developers are not ready to release information on it. If one has a really advanced technology, then one usually keeps key characteristics as trade secrets, unless the technology is patented.
 
Todays Spot Price, Ruthenium: bid=270, ask=305 dollars per troy ounce. A bit pricey.
 

Thread 'What happens if shielded cable has a short to the shield?'

While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
View full post »

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Question about bonding ground and neutral'

I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
View full post »

Similar threads

Motion-powered GPS tracker to install permanently inside a bicycle frame
Replies
19
Views
6K
The Ultimate Battery: Overcoming Infernal Challenges
Replies
0
Views
2K
Hydrogen-Boron Plasma Toroid Fusion
Replies
4
Views
7K
Hydrogen-boron High Density Plasma Toroid Fusion
Replies
3
Views
4K

Hot Threads

Recent Insights

Back
Top