Setting up wind power equipment

AI Thread Summary
To set up wind power for a home, essential equipment includes a wind turbine, inverter (which converts DC to AC), battery bank, circuit breaker box, and wiring. The inverter is necessary to manage the DC output from the turbine and integrate it with the home's electrical system. It's important to follow safety regulations outlined in the National Electric Code (NEC) and understand that disconnecting from the grid entirely can be challenging with DIY kits. Additionally, remaining connected to the grid can allow for selling surplus energy back to the power company. Researching power generation principles and building a prototype can enhance understanding and safety in the setup process.
freenergy4us
Messages
2
Reaction score
0
I'm a beginner at this but I'm an aspiring student of the electrical field. Electrical engineer, electrician, electronics technician. I like it all.

My question is what equipment, other than what I know already, do I need to run as much of my house off of wind power?

Wind turbines or anything that spins basically.

I know I need a converter but I want to know why I need it besides the fact that it converts DC to AC. Just a little more explanation is all. I know a little about it.

Probably a transformer. Explain why.

A circuit breaker box. Explains itself.

And wires.

What else do I need? Is there a site that can show this in a diagram?
 
Engineering news on Phys.org
Why don't you tell us a little more about what you already know - maybe provide some details and ask more specific questions?
 
your 'converter' and transformer are a single system called an inverter. and you need it because a wind turbine will generate DC power. you then use the DC output to charge a battery bank. the battery bank then feeds the inverter which you tie into your houses supply. you cannot just go to Walmart and buy a 5kw inverter and tie it in, you will need a GTI (grid tie-in) inverter or synchronous inverter. if you are in the states you will want to pick up a copy of the National Electric Code (NEC) and do some reading in there. i don't know what the regulations are pertaining to wind generation but I am sure there is a section in there and anything the NEC puts regulations in for, there is a good reason.
 
Okay I know only what I've read so far from websites etc. I'm looking for diagrams like this

http://cgi.ebay.com/SOLAR-HOME-KIT-PANELS-CONTROLLER-BATTERY-INVERTER-/380288742901?pt=LH_DefaultDomain_0&hash=item588af9b5f5

And these pictures and videos are pretty good. http://mdpub.com/Wind_Turbine/

So why is it that some things need a converter and others don't like a solar water sprinkler?

I just need to know how to hook things up to get free wind power and disconnect from the grid completely if possible. But I think I may have found what I need, so thanks.
 
disconnecting from the grid entirely will prove difficult using a DIY generation 'kit'. and you will not do it with a $600 ebay kit. i have never looked into a solar sprinkler but it must be a DC sprinkler to not need an inverter. it sounds as if you do not know many of the principles behind what you are trying to do which makes it dangerous. also remaining on the grid could prove beneficial if you do end up generating sufficient power since any surplus energy you generate can be sold back to your power company.

do a little research on power generation and how wind/solar collectors work and maybe build a bench top prototype to gain some familiarity with what you are doing. you can find a lot of information on these topics on google.
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Thread 'Electromagnet magnetic field issue'
Hi Guys We are a bunch a mechanical engineers trying to build a simple electromagnet. Our design is based on a very similar magnet. However, our version is about 10 times less magnetic and we are wondering why. Our coil has exactly same length, same number of layers and turns. What is possibly wrong? PIN and bracket are made of iron and are in electrical contact, exactly like the reference design. Any help will be appreciated. Thanks. edit: even same wire diameter and coil was wounded by a...
Back
Top