SHM: Why do Both Masses Have Same Periods?

  • Thread starter Thread starter gaobo9109
  • Start date Start date
  • Tags Tags
    Shm
AI Thread Summary
The discussion focuses on why two masses connected by a spring have the same oscillation period despite differing masses. It is established that both masses experience the same restoring force due to the spring's properties. The center of mass is considered a reference point, leading to a consistent relationship between the oscillation periods of both masses. The spring's effective spring constant changes with the length of the spring segment each mass occupies, but this does not affect the overall period of oscillation. Ultimately, both masses oscillate with the same period due to the dynamics of their motion relative to the center of mass.
gaobo9109
Messages
68
Reaction score
0

Homework Statement


Two masses m1 and m2 are joined by a light spiral spring. Each body oscillates along the axis of the spring, which obeys Hooke's law in both extension and compression. The bodies move in opposite directions and the centre of mass of the system is stationary. Explain why the periods of the oscillations of both bodies are the same


Homework Equations





The Attempt at a Solution


Since the two masses are attached to the same spring, they should exprience the same amount of restoring force F.

Hence, F=m1a1=m2a2=kx
a1=k/m1x
a2=k/m2x
Since m1 and m2 are not the same, the value of k/m1 and k/m2 should also not be the same.
T = 2pi(k/m)1/2
Following this reasoning, how can the periods of oscillations of both body be the same? I don't understand.
 
Physics news on Phys.org
no actually ur working is wrong. considering centre of mass as a reference frame, the length from the cm to m1 will be m2*x/(m1+m2) and to m2 will be m1*x/(m1+m2). now spring constant k1 for m1 will be (m1+m2)/m2*k and k2 will be (m1+m2)/m1*k. so the (omega)^2 for both will be ((m1+m2)/m1m2). hence the time period for both will be 2pi/(omega) which is same for both.
 
Why are you considering the distance from centre of mass but not the total extension of the spring? I thought it is the total extension that provides the restoring force?
 
first thing I would like to ask u is abt which point these two masses will oscillate? u need to consider a fixed point for this and hence is the com.
 
Sorry, i did not read your previous thread carefully. Now I understood what you mean. But i am still a bit uncomfortable with the fact that the same spring will have different spring constant.
 
it is not that the "same spring will have different spring constant", but different length of the same spring will have different spring constant. Suppose u have one string of 1 m and k=1. so if u break it like 2/3 from say right. Then the spring constant of the right spring will be 3k/2 will for the left part will be 3k.
mathematically; suppose F/x=k
then F/(2x/3)=3/2 k
I hope u got it now =p
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top