Solve 2-D Motion Practice Homework: Truck & Watermelons

  • Thread starter Thread starter blackrose75
  • Start date Start date
  • Tags Tags
    Motion
AI Thread Summary
A truck's sudden stop causes a watermelon to roll off with an initial horizontal speed of 12.0 m/s. The bank's shape is defined by the equation y² = 14x, representing a parabolic curve. The user attempts to find the intersection of the watermelon’s trajectory, modeled by the equations 12t = x and y = -9.8(t)², with the parabola. However, the calculations are not yielding the correct results, indicating a potential error in the approach. Assistance is requested to solve the problem before the deadline.
blackrose75
Messages
5
Reaction score
0

Homework Statement


A truck loaded with cannonball watermelons stops suddenly to avoid running over the edge of a washed-out bridge (Fig. P4.64). The quick stop causes a number of melons to fly off the truck. One melon rolls over the edge with an initial speed vi = 12.0 m/s in the horizontal direction. A cross-section of the bank has the shape of the bottom half of a parabola with its vertex at the edge of the road, and with the equation y2 = 14x, where x and y are measured in meters. What are the x and y coordinates of the melon when it splatters on the bank?


2. The attempt at a solution

I've been attempting it by making a parabola equation out of 12t=x and -9.8(t)^2=y by solving for t and plugging it in so that y=-9.8(x/12)^2 and finding where it intersects with y^2=14x but it doesn't seem to work so perhapse I'm doing something wrong. Thanks though
 
Physics news on Phys.org
bump, I really need help on this for tomorrow please.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top