Solving Network of Resistors: R1, R2, R3 & R4

  • Thread starter Thread starter october2118
  • Start date Start date
  • Tags Tags
    Network Resistors
Click For Summary
SUMMARY

The forum discussion centers on solving a circuit problem involving resistors R1, R2, R3, and R4, where the resistance values are given in watts (W) instead of ohms (Ω). The resistances are R1 = 3 W, R2 = 5 W, R3 = 12 W, and R4 = 10 W. Participants clarify that "W" is commonly used as a substitute for ohms and emphasize the need for a clear circuit diagram to apply Kirchhoff's laws effectively. The discussion highlights the importance of accurately representing circuit components for problem-solving.

PREREQUISITES
  • Understanding of electrical resistance and Ohm's Law
  • Familiarity with Kirchhoff's laws for circuit analysis
  • Basic skills in drawing and interpreting circuit diagrams
  • Knowledge of series and parallel resistor combinations
NEXT STEPS
  • Research how to convert resistance values from watts to ohms
  • Learn how to apply Kirchhoff's voltage and current laws in circuit analysis
  • Explore techniques for drawing clear circuit diagrams using software like Windows Paint
  • Study series and parallel resistor calculations to simplify complex circuits
USEFUL FOR

Electrical engineering students, hobbyists working on circuit design, and anyone seeking to understand resistor networks and circuit analysis techniques.

october2118
Messages
2
Reaction score
0
So i am having trouble figuring out how to approach this problem

A) What is the current through the resistor, R1 in the above circuit?

+ --- _____________R2_________
/..... Joint /
/______R1_________/___________R3/
/
/____________R3_______________/

thats the circuit i have and here are the numbers

R1 = 3 W R2 = 5 W R3 = 12 W R4 = 10 W

whats really throwing me off is that they are in W instead of ohms i didnt know where i should start if i needed to add certian ones together like in a parallel series if i need to use kirchhoffs law.

I just really need some guidance and some explanation on how to do this

thanks
 
Physics news on Phys.org
W is a common substitute for OHMs. So just call them OHMS.

However, there are two R3s and no R4s.
The circuit is illegible. Draw it with Windows Paint. Save it then attach it to a new message.
Rough is OK as long as we can see where the wires go.

Assure us that this isn't homework... :)
 
W is the Latin transliteration for the Greek letter Omega.
 

Similar threads

Engineering Why is a differential amplifier considered the same as a subtractor?
  • · Replies 1 ·
Replies
1
Views
2K
Engineering Calculating the voltage at a certain Resistor
  • · Replies 3 ·
Replies
3
Views
2K
How to find the equivalent resistance of this electric circuit?
  • · Replies 5 ·
Replies
5
Views
4K
Engineering Why is the output voltage of the subtractor calculated like this?
  • · Replies 5 ·
Replies
5
Views
2K
Engineering Is my method of solving this correct? Superposition theorem
  • · Replies 15 ·
Replies
15
Views
3K
Comp Sci Need help finding the resistor size for a circuit (Ohm's law)
  • · Replies 1 ·
Replies
1
Views
2K
Engineering Solve Superposition Theorem for R1, R2 Circuit
  • · Replies 18 ·
Replies
18
Views
3K
How should I Approach this Circuit Calculation?
  • · Replies 7 ·
Replies
7
Views
2K
Calculating R1 and R2 for Opto-Triac Output Circuit
  • · Replies 34 ·
2
Replies
34
Views
6K
Finding resistances across nodes in a T-network/PI-network
  • · Replies 2 ·
Replies
2
Views
4K