Solving Viscosity Problems in an Auto Lift

  • Thread starter Thread starter kp3legend
  • Start date Start date
  • Tags Tags
    Viscosity
kp3legend
Messages
8
Reaction score
0

Homework Statement


An auto lift consists of a 55.56 cm diameter ram which slides concentrically in a 55.58 cm diameter
cylinder (see Figure 1). The cylinder engages a 2.8 m length of the ram at all times. The annular region
between the ram and cylinder is filled with viscous oil. The combined mass of the automobile, auto rack
and ram is 1750 kg. If the lift drops steadily at the speed of 0.25 m/s after being released, determine:
a) the viscosity of the oil, in Pa.s,
b) the shear stress at the surface of the inner cylinder.


Homework Equations



F=uA(v/y)
F=mg
t=u(du/dy)

The Attempt at a Solution



I can find the force which is the weight og ram+ram, also dy and dv. but i don't know how to find A. my friends told me that A = 2pi*2.8 put i don't think it was right because 2.8m is the length of the whole thing not diameter.
Please help me. I need to give my class a presentation about this and it counts as a test.
 
Physics news on Phys.org
What is the surface area of the cylinder? What is the surface area of the ram? Is the difference really significant?
 
  • Like
Likes 1 person
the surface of the cyclinder is 4.89m^2 and the surface area for the ram is also 4.89m^2. and no i don't see any huge differences between those values. and when i tried to find the viscosity it give me the value of 1.4kg/ms or 14 P. I don't know if mine is correct or not :( could you check for me please
 
Last edited:
That's what I get.
 
  • Like
Likes 1 person
thank you very much !
 

Thread 'Initial conditions for orbits around a wormhole'

Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
View full post »

Thread 'Help to convert units of a simple formula'

The value of H equals ## 10^{3}## in natural units, According to : https://en.wikipedia.org/wiki/Natural_units, ## t \sim 10^{-21} sec = 10^{21} Hz ##, and since ## \text{GeV} \sim 10^{24} \text{Hz } ##, ## GeV \sim 10^{24} \times 10^{-21} = 10^3 ## in natural units. So is this conversion correct? Also in the above formula, can I convert H to that natural units , since it’s a constant, while keeping k in Hz ?
View full post »

Hot Threads

Recent Insights

Back
Top