Sound(Determine period, frequency from the plot)

AI Thread Summary
The discussion revolves around analyzing a speech waveform sampled at 16,000 samples per second. The waveform is identified as unvoiced due to the absence of pitch, with 70 samples representing one cycle. The period of the waveform is calculated to be 0.004375 seconds, leading to a fundamental frequency of 228.57 Hz. It is noted that female speakers typically have higher frequencies than males, which can help in identifying the speaker's gender. Overall, the calculations and reasoning provided clarify the properties of the speech signal.
wislagrew
Messages
5
Reaction score
0
Hey, so I have this question
Figure 1 shows a short duration segment of a speech waveform that has been sampled at 16,000 samples per second. The x-axis shows sample number, while the y-axis shows amplitude.

lep1AFu.png


(i) From the plot, is the speech signal voiced or unvoiced? State your rea- soning.
(ii) From the plot, determine the number of samples that make up one period (or cycle) of the waveform.
(iii) Hence, compute the pitch period of the waveform in seconds.
(iv) Finally, compute the fundamental frequency (or pitch) of the speech sig-
nal.
(v) Is this likely to come from a male or female talker - explain your reason-
ing.

So I am not sure with my answers(i am stuck on iii):
(i)unvoiced;
(ii) 70 samples per second. If i am right, i could say f_s = 70 Hz;
(iii) I know the formula to find frequency (f =1/T), which I could use to find T, but is it possible to use it for f_s. if no,how can i find the period?
(iv) I want to use formula from sampling theorem f_s = 2f Hz. In this case my fundamental frequency equals to 140Hz.

As I said I am not sure of my solutions, so hope you can help me figure that out.
 
Physics news on Phys.org
Lets start with number i. An unvoised sound has no pitch to it. Think about saying "shut". The start of the word is a hiss not a frequency. Now think of the word "go" the sound of the "oo" has a pitch or frequency to it. So what do you think?

Number ii is correct. However to get a good estimate, you should count the samples is say 4 cyles and then divide the number of samples by 4.

On iii, if you know the sampling rate, it is given at 16000 samples per second and you have 70 samples between the wave popints, then what is the period of the tone? Knowing the period, you can easily compute the frequency, yes?

As to male or female, female speakers usually have a higher frequency. However, I do not know what the threshold is.
 
  • Like
Likes 1 person
Thanks for the great reply, it really helped a lot.
Just to check, I got the period - 0.004375s
 
Now you can get the frequency and the problem is basically solved.
 
Yeah, thanks a lot.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top