Calculating Tension in a Deflected Rope: A Simple Physics Problem

  • Thread starter Thread starter StephenPrivitera
  • Start date Start date
  • Tags Tags
    Tension
AI Thread Summary
The discussion focuses on calculating the tension in a deflected rope subjected to a force at its midpoint. The derived formula for tension, T, is T = FL/4d, based on the relationship between the force, rope length, and deflection distance. Participants confirm this calculation, noting a discrepancy with the textbook, which they believe contains errors. The book in question is "PHYSICS" by Ohanian, and users report multiple mistakes in its recent chapters. The consensus is that the calculations are correct, and the book is flawed.
StephenPrivitera
Messages
360
Reaction score
0
The book and I aren't getting along tonight. Maybe you can help.
A rope of length L has a tension T. Someone pushes on the rope with a force F at its midpoint and deflects the rope by a distance d. What is T is terms of L,d and F.
This is so simple I won't even explain my work.
2Tsinθ=F
sinθ=d/(L/2)=2d/L (approx)
so
T=\frac{FL}{4d}
Right?
The prob. in the book had numbers, but in the end I was off by a factor of 2.
 
Physics news on Phys.org
Ok well this is what I'm getting. instead of using some greek letter for the angle, i'll use H.

forces balancing:
F = 2Tsin(H)
T = F/2sin(H)

length of rope used by the angle is L/2.
since L is the hypotinuse, sin(H) = d/(L/2)
sin(H) = 2d/L

sub that into the first equation:
T = F/2(2d/L)
T = F/(4d/L)
T = FL/4d

I get the same thing.
 
I too got the same value i.e. t=FL/4d
 
BOOK's WRONG AHAHAHAHA!
 
Originally posted by StephenPrivitera
BOOK's WRONG AHAHAHAHA!
What book are you using? Seems like it has quite a few mistakes.
 
I know. I've found at least four in the last two chapters, and I've verified these with my professor, so it's not just stupid Stephen being less smart than the author. The book is PHYSICS by Ohanian 2ed.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top