Sum of Forces in x- and y-directions

AI Thread Summary
Yusef is pushing a chair with a mass of 55.0 kg using a force of 144 N at an angle of 35 degrees below the horizontal, while experiencing a frictional force of 106 N. The calculated acceleration in the x-direction is approximately 0.217 m/s², but the overall magnitude of acceleration is incorrectly stated as 1.517 m/s². The normal force must account for the upward component of the pushing force, leading to the equation R + (144)sin(35) = m*g, where R is the normal force. Balancing the forces in the y-direction is essential to determine the correct normal force and acceleration.
jjli
Messages
1
Reaction score
0

Homework Statement


Yusef pushes a chair of mass m = 55.0 kg across a carpeted floor with a force F of magnitude F(push) = 144 N directed at theta = 35.0 degrees below the horizontal. The magnitude of the frictional force between the carpet and the floor is F(fr) = 106 N. What is the magnitude of the acceleration a of the chair? What is the magnitude of the normal force F_N acting on the chair?

Homework Equations


\Sigma F_x = F_{\rm p}\cos\theta - F_{\rm fr} = ma_x
\Sigma F_y = F_{\rm N} - F_{\rm G}- F_{\rm p}\sin\theta = ma_y

The Attempt at a Solution



To figure out the sum of the forces in the x-direction, I plugged in known values, and found that my acceleration in the x-direction was .217416 m/s^2. I thought I used the correct method to figure out the sum of forces in the y-direction (I assumed the force of gravity and the normal force were equivalent) and I found out that the acceleration in the y-direction was -1.50173 m/s^2. However, my magnitude of acceleration, 1.517 m/s^2, was not the correct answer. The question asked for both the magnitude of acceleration and the normal force (which I figured to be 55(g): 539), so perhaps my normal force was wrong?

Help!
 
Physics news on Phys.org
Hi

The first part is right. For the second part we know that the normal force (R) is equal to m*g when no other forces are acting on the chair. In this case there is an external force acting on the chair, a component of this force is acting in the upwards y direction. Yet there is no acceleration in the y direction so we know that the forces must be balanced.

So in this case:

R + (144)sin30 = m*g

You can solve for R from there.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top