Two bulbs, power, voltage, seres connection

AI Thread Summary
When two bulbs rated 25 W - 110 V and 100 W - 110 V are connected in series to a 230 V supply, the current through each bulb must be the same due to the series configuration. The user initially calculated the current for each bulb incorrectly, leading to confusion about the relationship between voltage, power, and resistance. To find the correct resistance, the user is advised to consider each bulb's specifications at their rated voltage. The resistance can be calculated using the formula p = v²/r, which requires using the rated voltage of 110 V for each bulb. Understanding these calculations is crucial for predicting the behavior of the bulbs under the given conditions.
math_maj0r
Messages
14
Reaction score
0

Homework Statement



Two bulbs rated 25 W - 110 V and 100 W - 110 V are connected in series to a 230 V supply. What will happen?
>
>

Homework Equations



p = vi. p = v2/r


The Attempt at a Solution



I am not sure I know how to interpret it correctly. To find the current through bulb 1, I did P1/V1 = 25/110 = .227, and for bulb 2 I did P2/V2 = 100/110 = .909. This can't be right because I1 must equal I2 since they are in series.

If I use the other formula p = v2/r and solve for resistance, i get a really big answer. i think i may be doing something wrong by plugging in 110 for v.

?
 
Physics news on Phys.org
You get a big answer ?
How much ?
 
First, consider each bulb separately.

If you connect the 25W bulb across a 110V source (as it was designed for), what is the resistance?
 

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Similar threads

Voltage Drop in Parallel Receptacle Wiring
Replies
9
Views
2K
Brightness of bulbs depending on their watt level
Replies
11
Views
3K
How to find the power consumed by the light bulb
Replies
19
Views
3K
Which bulb will glow brighter in a series and parallel circuit?
Replies
5
Views
2K
Incandescent Bulb - suitable approximation for voltage-current curve
Replies
2
Views
947
Current, voltage : brightness of bulb in parallel or series
Replies
2
Views
4K
Problem: How can American 110V light bulbs be used on a 240V grid?
Replies
25
Views
6K
Electrical power of a lightbulb
Replies
2
Views
1K
100 W and 60W bulb plugged in separately....Which with more resistance?
Replies
11
Views
2K
Change in watts and power dissipated
Replies
8
Views
2K

Hot Threads

Recent Insights

Back
Top