Two masses suspended from a pulley

  • Thread starter Thread starter rusticle
  • Start date Start date
  • Tags Tags
    Pulley Two masses
rusticle
Messages
4
Reaction score
0

Homework Statement



hi, I am really stuck on this question:

Two masses m and M, M>m are joined by a massless inelastic string and suspended from a pulley of radius R and moment of inertia I. the pulley rotates about its centre freely with no friction. The system starts at t=0 from rest. during the motion of the system, the string does not slip on the pulley's rim.


Homework Equations



a) Find the acceleration of M. What sort of motion is produced?
b)Are the tensions on each side of the pulley the same? Do they vary with time? Find their magnitude(s) in terms of M, m, I and g.



The Attempt at a Solution



i have produced a free body diagram and come up with the following equations:

ma + Ma = mg + Mg - [T][/m] - [T][/M] (1)

Newton II (rotational ver) I(alpha) = TR (2)

and a = R(alpha)

im not sure where to go next, or if I am correct with these equations.
help would be muchly appreciated
 

Attachments

Physics news on Phys.org
rusticle said:
i have produced a free body diagram and come up with the following equations:

ma + Ma = mg + Mg - [T][/m] - [T][/M] (1)

Newton II (rotational ver) I(alpha) = TR (2)

and a = R(alpha)
Your equations (1) and (2) are not quite right. Show how you got them. (I suggest writing a separate equation for each mass, so you end up with three equations.)
 
##|\Psi|^2=\frac{1}{\sqrt{\pi b^2}}\exp(\frac{-(x-x_0)^2}{b^2}).## ##\braket{x}=\frac{1}{\sqrt{\pi b^2}}\int_{-\infty}^{\infty}dx\,x\exp(-\frac{(x-x_0)^2}{b^2}).## ##y=x-x_0 \quad x=y+x_0 \quad dy=dx.## The boundaries remain infinite, I believe. ##\frac{1}{\sqrt{\pi b^2}}\int_{-\infty}^{\infty}dy(y+x_0)\exp(\frac{-y^2}{b^2}).## ##\frac{2}{\sqrt{\pi b^2}}\int_0^{\infty}dy\,y\exp(\frac{-y^2}{b^2})+\frac{2x_0}{\sqrt{\pi b^2}}\int_0^{\infty}dy\,\exp(-\frac{y^2}{b^2}).## I then resolved the two...
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
Back
Top